東莞市中諾質檢儀器設備有限公司
| 參 考 價 | 面議 |
產品型號ZY6112
品 牌
廠商性質生產商
所 在 地東莞市
聯系方式:鄧斌查看聯系方式
更新時間:2018-05-15 13:44:39瀏覽次數:605次
聯系我時,請告知來自 儀表網ZY6112豎井管道垂直燃燒試驗機
Shaft pipe vertical burning test machine
UL 1666豎井管道垂直燃燒試驗機是目前zui為熱門的產品,同時也是我司zui為優勢的產打產品之一,曾與四川消防研究院、中國標準化研究院等七千多家省市質檢院是我們的合作客戶。UL 1666 vertical shaft pipeline burning machine is curr
ZY6112豎井管道垂直燃燒試驗機
Shaft pipe vertical burning test machine
UL 1666豎井管道垂直燃燒試驗機是目前zui為熱門的產品,同時也是我司zui為優勢的產打產品之一,曾與四川消防研究院、中國標準化研究院等七千多家省市質檢院是我們的合作客戶。
UL 1666 vertical shaft pipeline burning machine is currently the most popular products, at the same time also is one of our most advantage products within the play, with sichuan fire research institute, China academy of standardization is more than seven thousand cities and provinces such as quality inspection institute cooperation of our customers.
一.適用范圍:Scope of application:
適用于樓與樓層間管道內配線及升降機用電纜燃燒性能的評定。
Suitable for floor and floor wiring between the pipe and elevator with cable combustion performance evaluation.
二.符合標準:Conform to the standard:
符合UL1666<<Test for flame propagation height of electrical and optical-fiber cables installed vertically in shafts>>試驗標準
Meet UL1666 < < Test for flame propagation height of electrical and optical - fiber cables installed vertically in shafts > > Test standard
三.主要參數:The main parameters:
3.1 試驗箱
3.1.1 U型壓力計:測量試驗箱的壓力維持在0-12PA
3.1.2 溫濕度計:測量試驗箱的溫度和濕度
3.1.3試驗箱的結構:整體結構由混泥土墻面砌成,*層為1.22M,第二層為3.66M,頂層為2.24M. 外部尺寸:7.12M高x1.3M寬x2.5M長。
3.1.4墻面結構是密度為106lb/ft3(1698kd/m3) 的混泥土,其熱傳導率(k)在 21.1℃為0.38Btu(0.055W/mk)
3.1.5*、二層由203mm厚的增強普通重量的水泥構成.頂部由能夠保證嚴密封性的墻面結構構成
3.1.6位于第二層的測量孔必須在*層測量孔(305mm by 610mm)的垂直上方.每個孔離箱子后面203mm,離箱子側面102mm.
3.1 test chamber
3.1.1 u-shaped pressure gauge: measuring the pressure of the test chamber remain at 0-12 pa
3.1.2 temperature and humidity meter, measure the temperature and humidity test chamber
3.1.3 test chamber structure: overall structure by the concrete wall build by laying bricks or stones becomes, the first layer of 1.22 M, the second layer of 3.66 M, the top is 2.24 m. external size: 7.12 M high x1.3 M
Wide x2.5 M long.
3.1.4 wall structure is the density of 106 lb/ft3 (1698 kd/m3) of the concrete, the thermal conductivity (k) in 21.1 ℃ to 21.1 Btu (0.055 W/mk)
3.1.5 the first and second floor by 203 mm thick enhance the average weight of cement. The top is composed of can ensure strict sealing wall structure
3.1.6 is located in the second layer of hole must be in the first layer measurement hole (305 mm by 610 mm) above the vertical. Each hole 203 mm, from behind the box side is 102 mm away from the box.
:東莞中諾(中國臺灣)質檢儀器設備有限公司
Contact: dongguan (Taiwan) quality inspection instrument equipment co., LTD
(轉)815
(艾新華)
http://www.ajh007.com
http://www.zon007.com
http://zonskyszajh.bmlink.com/
http://blog.sina.com.cn/u/3836926922
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
商 鋪:東莞市中諾質檢儀器設備有限公司 http://m.liuyangwu.com/st51448/
主營產品:建筑材料檢測儀器,電線電纜阻燃檢測設備,燃燒測試實驗室,火災測試試驗室解決方案,塑料制品質量檢測設備,單體燃燒試驗機(SBI),材料產煙毒性危險分級試驗機,錐形量熱儀(熱釋放速率),鋪地材料輻射熱通量試驗裝置,GB8624-2012
移動端:東莞市中諾質檢儀器設備有限公司手機站
儀表網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
號碼可能有誤,請核對!
請選擇省份
聯系方式
東莞市中諾質檢儀器設備有限公司
田东县|
阿拉善右旗|
固始县|
溧水县|
黄浦区|
静海县|
凉山|
阳山县|
新化县|
五台县|
封开县|
玉林市|
斗六市|
茌平县|
阿勒泰市|
香格里拉县|
米林县|
文化|
南木林县|
临猗县|
榆社县|
西乌珠穆沁旗|
永善县|
崇信县|
尼玛县|
师宗县|
梧州市|
潮安县|
连云港市|
靖安县|
泰来县|
杨浦区|
天祝|
禄丰县|
遂宁市|
嘉定区|
靖宇县|
剑川县|
庆安县|
阳东县|
扎赉特旗|
