磁翻板液位計

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質經銷商

所在地深圳市

在線詢價 收藏產品

聯系方式：楊飛查看聯系方式

更新時間：2025-11-06 08:44:21瀏覽次數：132次

聯系我時，請告知來自儀表網

產品分類 品牌分類

  液位儀表

全部產品列表

暫無信息

利美泰克自控設備有限公司

經營模式：經銷商

商鋪產品：16條

所在地區：廣東深圳市

聯系人：楊飛（銷售經理）

詢價 給他留言

產品簡介

腔體規格：測量范圍：300～15000mm指示精度：±3mm工作壓力：0~34.5MPa工作溫度：-196～593℃介質密度：≥0.25g/cm3介質密度差：≥0.1g / c m 3介質粘度：≤1500cp腔體規格：2~3‘ 腔體可選接液材質：不銹鋼，其他多類材質可供選擇，包括：PVC、PTFE、HC、HB、A20、Titanium、Ziconium 、Monel等可選。過程連接：法蘭安裝，焊接......

詳細介紹

腔體規格：
測量范圍：300～15000mm
指示精度：±3mm
工作壓力：0~34.5MPa
工作溫度：-196～593℃
介質密度：≥0.25g/cm3
介質密度差：≥0.1g / c m 3
介質粘度：≤1500cp
腔體規格：2'~3‘ 腔體可選
接液材質：不銹鋼，其他多類材質可供選擇，包括：PVC、PTFE、HC、HB、A20、Titanium、Ziconium 、Monel等可選。
過程連接：法蘭安裝，焊接短管連接，3/4 NPT螺紋(3000#)安裝可選

磁翻板腔體腔體
耐壓數據及計算方法

For the convenience of piping engineers, the following pages show the allowable pressure rating at temperature of various piping materials including Stainless Steel Type 304 and 316 in sizes ½” through 24” in popular wall schedules.
    Stress values shown at various temperatures are as given in Appendix A of ANSI B31.3-Code for Pressure Piping for Petroleum Refinery Piping.
The allowable pressure ratings have been calculated from the basic formula given in ANSI B31.3 as

follows:P= 2SET/D

Where:
T = design thickness of the pipe (121/2% less than the nominal wall thickness of any given pipe size)
P = internal design pressure, PSIG
D = outside diameter of pipe, inches
S = allowable stress for materials at service temperature, PSI
E = 1.0 for seamless pipe and   0.8 for welded pipe.

The computations shown are a preliminary guide for determining the proper wall thickness and are not to be considered a substitute for various Codes for Pressure Piping.

The user should refer to the applicable Code for Pressure Piping covering the design and material limitations and rules. The particular Code should be reviewed before final design thickness is determined. Depending upon the general service for which the piping system is intended, one of the following may be applicable:

• ASME-Section I-Power Boilers
• ASME-Section III-Nuclear Power Plant Components
• ASME-Section VIII-Pressure Vessels
• ANSI B31.1-Power Piping
• ANSI B31.3-Petroleum Refinery Piping
• ANSI B31.5-Refrigeration Piping

The user is cautioned that the stress values shown in the various Codes do vary. For example, the stress values used in our calculations are not the same as noted in ANSI B31.1. Limitations on maximum temperature for materials may also vary with each Code.

It should be noted that all calculations are based on a specific piping material. Other materials may be used in the manufacture of butt weld fittings.