長春博盛量子科技產品貿易有限公司
會員1.png)
長春博盛量子科技產品貿易有限公司
| 參 考 價 | 面議 |
產品型號標準
品 牌
廠商性質代理商
所 在 地長春市
聯系方式：楊女士查看聯系方式
更新時間：2018-05-15 14:51:12瀏覽次數：307次
聯系我時，請告知來自 儀表網暫無信息 |
The Bentham Fibre Spectral Loss System is a modular system consisting of chopped light source, monochromator, launch optics, detector and lock-in amplifier.
The Bentham Fibre Spectral Loss System is a modular system consisting of chopped light source, monochromator, launch optics, detector and lock-in amplifier. The whole system is controlled by a PC which also calculates loss in dB/km as a function of wavelength. Spectrol Loss in fibres is usually measured by the cut-back method. Modulated while light is passed through a monochromator before being launched into one end of the fibre under test. The light emitted from the other end of the dibre is collected by a large area indium gallium arsenide or silicon detector and the resulting signla amplfied by a lock-in amplfier. The detector end of the fibre is then cut back by a known length and the cleaved end reinserted in the detector assembly. The spectral loss of the fibre is calculated from the two stored curves as follows: Spectral Loss (dB/km) = log10 (short/long)/cutback | ||
The prime system requirements are:
| ||
The final signal-to-noise ratio and hence speed and accuracy of measurement is dominated by the level of light reaching the detector. In all real systems this light level is limited by the efficiency and light throughput of the monochromator. When comparing various commercially available monochromators you find that most have an f number in the region of 4. It is a common misconception to assume that light throughput can be assessed by comparing f number alone. This is not the case. For a given spectral bandwidth, a large f/4 monochromator (long focal length, large mirrors and gratings) will operate with wider slits than a small f/4 unit. This wider slit allows more power through and into the fibre. The Bentham system uses a 300mm focal length, f/4 monochromator to launch 5nW or -53dBm (cw) into a single mode fibre (1300nm, 10nm bandwidth). | ||
Stability Due to the sequential nature of the measurement, both optical and mechanical stability over the period of the two spectral runs is of critical importance. For the Bentham range, optical stability is ensured by the IL1 light source, which uses a 100W QH lamp controlled by a highly stabilised constant current power supply. This power supply is at least 10 times more stable than a normal laboratory stabilised supply. Mechanical instability in such systems results in short or long term wander of the focussed spot over the end of the fibre at the launch end. In the Bentham system the light source and launch optics are bolted firmly to the monochromator, which is constructed from a single rigid casting. | ||
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
儀表網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
防城港市|
大新县|
中卫市|
密云县|
瑞安市|
青浦区|
丹棱县|
阳西县|
台中市|
芦山县|
莒南县|
乌兰察布市|
平安县|
锡林郭勒盟|
武山县|
大新县|
浦县|
丰顺县|
乌什县|
丘北县|
丹凤县|
伽师县|
固始县|
永城市|
三亚市|
清苑县|
汾阳市|
兰西县|
广南县|
保德县|
同仁县|
松原市|
泰安市|
宿迁市|
潜江市|
水富县|
丰顺县|
阿拉尔市|
沅陵县|
汨罗市|
子长县|