會員1.png)
適用范圍 Applicable scope
CJT1系列交流接觸器（以下簡稱接觸器）主要用于交流50Hz、額定工作電壓至660V，AC-3使用類別下，380V時的額定工作電流至150A、660V時的額定工作電流至100A的電力系統中，供遠距離接通和分?jǐn)嚯娐坊蝾l繁地起動和控制交流電動機的運轉。可與適當?shù)臒徇^(guò)載繼電器或電子式保護裝置組成電磁起動器，以保護可能發生過載的電路。
產品符合GB 14048.4和IEC 60947-4-1等標準。
CJT1 series AC contactor (hereinafter referred to ascontactor) is suitable for the power system of AG 50Hz and rated working voltage up to 660V or the power system of rated working current up to 150A at 380V and rated working current up to 100A at 660V under AC-3 utilization, to make and break circuit in a far distance, or to frequently start and control AC motor. The contactor can be combined with thermal overload relay or electronic protection equipment to form into an electromagnetic starter, to protect the circuit against possible overload.
The products are in conformity with such standards as GB 14048.4 and IEC 60947-4-1.
型號及其含義 Model and its meaning
主要技術參數 The main technical parameters
正常工作條件和安裝條件 Normal working conditions and installation conditions
◇周?chē)諝鉁囟葹椋?5℃~+40℃，24小時內其平均值不超過+35℃。
◇海拔：不超過2000m。
◇大氣條件：在+40℃時大氣相對濕度不超過50%，在較低溫度下可以有較高的相對濕度，最濕月的平均溫度不超過+25℃，該月的平均相對
濕度不超過90%。并考慮因溫度變化發生在產品上的凝露。
◇污染等級：3級。
◇安裝類別：III類。
◇安裝條件：安裝面與垂直面傾斜度大于±50°。
◇沖擊振動：產品應安裝和使用在無顯著搖動，沖擊和振動的地方。
◇ The ambient air temperature is: -5℃ ~ +40℃, 24hours its average does not exceed +35℃.
◇ Elevation: no more than 2000 meters.
◇ Atmospheric conditions: At +40℃ when the relative humidity of not more than 50%, at a lower temperature can have a higher relative humidity, the
wettest month average minimum temperature does not exceed +25℃, the average monthly maximum relative Humidity does not exceed 90%. And
consider the occurrence of temperature due to condensation on the product.
◇ Pollution Level: 3 level.
◇ Installation category: III category.
◇ Installation Conditions: the installation surface and the vertical slope of more than ± 50°.
◇ Shock Vibration: The product should be installed and used where there is no significant shaking, shock and vibration.
外形及安裝尺寸 Shape and installation dimensions
苍南县|
双城市|
临湘市|
平乡县|
阳谷县|
明光市|
苏尼特左旗|
昌江|
凤翔县|
克拉玛依市|
桂阳县|
宜宾县|
大城县|
梁山县|
和静县|
海兴县|
峨边|
巫山县|
虹口区|
新乡县|
辉南县|
金乡县|
蓬溪县|
西平县|
清镇市|
枞阳县|
平定县|
丽江市|
中宁县|
容城县|
育儿|
柏乡县|
桐梓县|
勃利县|
克东县|
霍城县|
石首市|
清涧县|
宝兴县|
祁门县|
遵义市|