99热一区二区综合,亚洲日韩女同久久精品,91自产国偷拍在线

加工中心用*檢測測頭

產品型號： ts27r

產品名稱： ts27r接觸式對刀和*破損檢測

在機床上精確測量*長度和直徑無需機外對刀，可對旋轉*進行長度或直徑測量而不造成*或測針磨損，序中*破損檢測可識別破損的*，避免工件報廢，通過檢測長度和直徑來識別*，發現*的錯裝，雷尼紹可靠的測頭機構可在數百萬次觸發中保持承諾的精度，測針有弱保護結構，可防止在碰撞情況下對測頭的損害，有交換工作臺的機床可選用ｏｔｓ光學傳輸式測頭。

產品描述：

ts27r接觸式對刀和*破損檢測

●加工中心用標準對刀測頭

●超小型工作臺安裝

●精確的*長度和直徑測量

●可檢測旋轉*而不會造成*或測針磨損

●測針有弱保護，可防止發生碰撞時損壞測頭

about ts27r

ts27r is mounted on the machine table. it enables the user to set tool length and diameter of rotating tools, and to carry out broken tool detection.

as with all renishaw hard-wired probe systems, ts27r requires themi 8 interface to convert probe signals into an acceptable form for the cnc machine control.

ts27r features and benefits

the standard tool setting probe for machining centres
compact table mounting
precise tool length and diameter measurement
rotating tools can be checked without wear to the tool or stylus
stylus is protected by a weak link, preventing probe damage in the event of a collision

ts27r specification

specification
sense directions	±x, ±y, +z
weight	650 g （23 oz）
transmission type	hard-wired
uni-directional repeatability （max 2 sigma at stylus tip）	1.0 µm （0.00004 in）
trigger force lowest force highest force	1.3 n （4.6 ozf） 2.4 n （8.5 ozf）
stylus overtravel xy plane +z direction	±10° 5.5 mm （0.21 in）
maximum recommended stylus length	cranked stylus 27 x 33 mm （1.06 x 1.3 in）
sealing	ip x8
mounting	12 mm （0.5 in） t-bolt （not supplied）. optional spiral pins to allow accurate re-mounting.
compatible interface	mi 8 /mi 8-4

software for ts27r

renishawtool setting software allows you to set tool length and diameter offsets for single point and multiple point tools, perform in cycle broken tool detection and manual or automatic （programmed） positioning.