久久久久草免费老司机,无码中文色综合,jiujiureri

住友(SUMITOMO ELECTRIC) TYPE-81M12 多用途高性能帶狀光纖熔接機 熔纖機

華盛電子儀器*專業回收、銷售、租賃、全新二手儀器儀表!!咨詢

TYPE-81M12 多用途高性能帶狀光纖熔接機(可熔接芯數達12芯)

12芯帶狀光纖的熔接時間僅需14秒
雙聯自動獨立加熱器提高作業效率
全屏導航觸摸界面實現簡單操作

高速、便捷、可靠

12芯帶狀光纖的熔接時間僅約14秒，并且獨立自動雙聯加熱器實現加熱補強時間約45秒(使用FPS-6熱縮管的情況下)，其加熱器是業界*的功能，在中國擁有。
人性化的全屏導航觸摸界面和直觀的圖形用戶界面
熔接機內置幫助視頻，可在主機顯示屏上播放
進一步提高了防振、防水、防塵以及防風等特性
可通過互聯網進行軟件升級和遠程診斷

規格參數

TYPE-81M12 (更多信息請)

	Coating diameter *2
Applicable optical fiber	Material	Silica Glass
	Profile type	Single Mode Fiber (SMF)/ITU-T G652 Multi Mode Fiber (MMF)/ITU-T G651 Dispersion Shifted Fiber (DSF)/ITU-T G653 Non-Zero Dispersion Shifted Fiber (NZ-DSF)/ITU-T G655, G656 Bend Insensitive Fiber (BIF)/ITU-T G657
	Number of fiber *1	1c, 2c, 4c, 5c, 6c, 8c, 10c, 12c
	Cladding diameter	φ125 μm
	Coating diameter *2	Single: 250 μm, 500 μm, 900 μm Ribbon fiber thickness: 280-400 μm
	Cleave length	10mm
Applicable cable	0.25mm primary coated 1-fiber drop cable	3.1mm or 2.6mm×2.0mm (Excluding messenger steel wire)
Applicable cable	0.25mm primary coated 1-fiber indoor cable	2.0mm×1.6mm
Physical Characteristics	Size (Main body)	120W×154D×130H(mm) *3 (4.7W×6.0D×5.1H(inches))
	Weight	Approx. 2.0 kg (With Battery pack BU-11)
	Display size	4.1" touch screen color LCD display
Power Conditions	Power consumption	Max. 80W
	AC operation	With AC adapter ADC-1430S Input: AC 100-240V 50/60Hz 1.1A
	DC operation	Input: DC 10-15V, 4.5A
	Battery operation	(With BU-11) 11.1V (4600mAh)
	DC output	12V For Sumitomo’s hot jacket remover
In - Out Terminal	Serial port	USB 2.0 mini-B type
In - Out Terminal	Storage media	SD / SDHC memory card
Splice Performance at room temperature (25°C)	Splice loss (typical)*4	SMF : 0.05 dB MMF: 0.02 dB DSF : 0.08 dB NZDSF : 0.08 dB
	Screening load (typical)	1.96N - 2.09N (at stage)
	Splice time (typical)	Approx. 14 seconds (SMF8-12c) Approx. 12 seconds (SMF4c) Approx. 9 seconds (SMF1c)
	Splice & Heat cycles	Approx. 160 cycles *5
	Splice program	Maximum 200 fusion programs can be selected and customized.
	Splice data storage	10,000 splices
	Splice image capture	64 splices
Heater Performance	The number of heaters	2 built-in heaters are available
	Sleeve length	Up to 60mm
	Protection sleeve	Fiber protection sleeve
	Up to 60mm sleeve	60mm for single fiber (FPS-1, FPS-61-2.6) 40mm for ribbon up to 8c fiber (FPS-5) 40mm for ribbon up to 12c fiber (FPS-6, FPS-M12) Protection sleeve for Splice-on Connector(Single Fiber connector only)
	Heating time(typical)*6	Approx. 45 seconds. (40mm for 12c fiber)
	Heating Program	Max. 100 settings
Environmental Conditions and Power Conditions	Operating temperature	-10 to +50°C
	Storage temperature	-40 to +80°C
	Humidity	0 to 95%RH with no dew present
	Altitude	Up to 3,660 m
Environmental Durability	Shock resistance*7	Drop from 76cm on 5 faces (Excluding top face)
	Water resistance*7	Equivalent to IPx2 (Operates normally after being exposed to water dripping at 3mm/min. for at least 2.5 min on each of 4 surfaces tilted at 15 degree.)
	Dust resistance*7	Equivalent to IPx5 (Operates normally after 8 hours in a dust chamber containing dust of particle size 75 um or below)

*1 光纖夾具需要符合涂覆層光纖和光纖芯數的要求。
*2 光纖夾具不能用于松套管光纜。
*3 突出的部分不包括在內。
*4 在室溫條件下，用住友同種光纖以ITU-T和IEC標準的切斷法測得。
*5 循環次數根據電池狀態和操作環境不同也會隨之變化。
*6 使用住友生產的保護套管在室溫條件下，供電為AC電源適配器。
*7 住友對電池性能進行了試驗和確認，但不保證本產品受損情況下的狀態。