當前位置：北京精科智創科技發展有限公司>>材料電學高溫測試設備>>高溫電阻率測試系統>>HTRC-600型高溫導電材料電

HTRC-600型高溫導電材料電

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質經銷商

所在地北京市

在線詢價 收藏產品

聯系方式：謝偉華查看聯系方式

更新時間：2025-12-14 09:59:16瀏覽次數：68次

聯系我時，請告知來自儀表網

產品分類 品牌分類

  材料電學高溫測試設備

熱釋電系數測試系統

熱敏元件材料參數測量分析系統

高溫熔融玻璃電導率測試裝置

高溫絕緣電阻測試儀

導電材料高溫電阻率測試儀

高溫鐵電測試系統

高溫絕緣材料電阻率測試儀

高溫壓電d33測量儀

金屬高溫電阻測量系統

高溫高壓電容測試系統

變溫光譜測試系統

材料雙波段發射率測量系統

高溫壓電阻抗分析測試系統

高溫超導材料測試系統

高溫電阻率測試系統

熱激勵去極化電流測量

高溫?zé)犭姴牧蠝y試儀

高溫氣敏元件測量系統

高溫四探針綜合測試系統

高溫半導體材料電阻率測試儀

高溫介電測量系統

低溫介電測試系統

全部產品列表

暫無信息

北京精科智創科技發展有限公司

經營模式：經銷商

商鋪產品：412條

所在地區：北京北京市

聯系人：謝偉華（經理）

詢價 給他留言

產品簡介

HTRC-600型高溫導電材料電阻率測試系統 HTRC-600型高溫導電材料電阻率測試系統 關鍵詞：電導率

詳細介紹

HTRC-600型高溫導電材料電阻率測試系統

HTRC-600型高溫導電材料電阻率測試系統

關鍵詞：電導率，電阻率，高溫600℃，兩探針，四探針

HTRC-600型高溫導電材料電阻率測試系統是一款用于測量材料電阻，電導率的專用設備，采用由四端測量方法測試電阻率系統與高溫試驗箱為一體的專用的高溫測試系統，滿足半導體及導體材料因溫度變化對電阻值變化的測量要求，通以在高溫、真空、氣氛的條件下測量導電材料電阻和電阻率，可以分析被測樣的電阻和電阻率隨溫度、時間變化的曲線．目前主要針對圓片、方塊、長條等樣品進行測試，可以廣泛用于碳系導電材料、金屬系導電材料、金屬氧化物系導電材料、結 構型高分子導電材料、復合導電材料等材料的電阻率測量。測控軟件可以顯示出溫度與電阻，電阻率，電導率數據的變化曲線。

一、主要應用范圍：

1、廣泛用于碳系導電材料的電阻率和電導率測量

2、金屬系導電材料的電阻率和電導率測量

3、金屬氧化物系導電材料的電阻率和電導率測量

4、高分子導電材料的電阻率和電導率測量

5、復合導電材料等材料的電阻率測量

6、可以測量硅、鍺單晶（棒料、晶片）電阻率

7、符合標準：ASTM B193-02和GBT 6146-2010 、GBT15662-1995

8、產品主要特點：

1、高溫兩探針夾具與帶升降高溫測試平臺配合使用，組成高溫兩探針測試平臺；

2測溫?zé)犭娕继筋^與樣品平臺為同一熱沉，確保測量溫度與樣品溫度的一致性；

3、采用緊湊型設計，體積小、結構簡潔，操作簡單、方便；

4' 隔熱盤隔離樣品平臺與調節平臺，并與高溫測試平臺重合，具有理想的隔熱保溫效果；

5、探針調節裝置具有三維精確調節功能，精確定位探針的位置；

6、探針調節裝置具有粗調功能，有效增大探針的調節范圍；

7、探針調節裝置帶探針壓力調節功能，確保探針與樣品的良好接觸，又不損傷樣品；

8、探針采用帶同軸屏蔽層設計，減少電磁對測量的干擾；

9、探針電極選用鉑銥合金，有效減少接觸電阻，并具有良好的高溫抗氧化能力；

10、自帶校準件，與各測試儀器配套，校準測試夾具。

主要技術參數：

1、測量溫度范圍：RT~600℃或RT~800℃或RT~1200℃可選

2、測試探針： 2個高溫高頻探針或4個高頻探針

3、電極直徑：26.8mm

4、樣品大小：厚度小于10 mm，直徑5~40mm

5、溫控方式：恒溫、變溫、常溫

6、控溫精度：±0.4℃

7、電阻率：10nΩ-10MΩ

8、電阻：10nΩ-100MΩ

9、電導率：10-5 ～105 s/cm

10、重量：38KG

11、工作溫度：5℃至40℃

12、重量：15KG

13、可以配合任意型號Agilent 、 WayneKer r 、 So lar tron 、同惠、 Keysight

等LCR表進行無縫結合

14、設備可以配合ZJ-3型和ZJ-6型壓電測試儀進行壓電D33系數測量

HTRC-600 resistivity testing system for high temperature conductive materials is a special equipment for measuring material resistance and conductivity. It adopts a special high temperature testing system consisting of a four-terminal resistivity measuring system and a high temperature test box to meet the measurement requirements of resistance changes of semiconductor and conductive materials due to temperature changes. It can be used in high temperature, vacuum and atmosphere. Measuring the resistance and resistivity of conductive material under a piece can analyze the curve of the resistance and resistivity changing with temperature and time. At present, the test is mainly aimed at disc, square, strip and other samples, which can be widely used in carbon conductive material, metal conductive material, metal oxide conductive material, structural polymer conductive material, composite conductive material and so on. Resistivity measurement of materials. Advanced measurement and control software can show the curves of temperature and resistance, resistivity and conductivity data.

I. Main applications:
1. Widely used for resistivity and conductivity measurement of carbon-based conductive materials
2. Measurement of resistivity and conductivity of metal conductive materials
3. Measurement of resistivity and conductivity of metal oxide conductive materials
4. Measurement of Resistivity and Conductivity of Polymer Conductive Materials
5. Resistivity Measurement of Composite Conductive Materials and Other Materials
6. Measurable resistivity of silicon and germanium single crystals (rods and wafers)
7. Compliance criteria: ASTM B193-02 and GBT 6146-2010, GBT 15662-1995
8. Main features of the product:
1. The high temperature two-probe fixture is used in conjunction with the high temperature test platform with lifting and lowering to form a high temperature two-probe test platform.
The thermocouple probe and the sample platform are the same heat sink to ensure the consistency between the measured temperature and the sample temperature.
3. Compact design, small size, simple structure, simple operation and convenience;
4. Isolating the sample platform and adjusting platform of the heat insulation disk, and coinciding with the high temperature test platform, it has ideal heat insulation effect.
5. The probe adjusting device has three-dimensional precise adjusting function, which can accurately locate the position of the probe.
6. The probe adjusting device has the function of coarse adjustment, which effectively enlarges the adjusting range of the probe.
7. The probe regulator has the function of adjusting the pressure of the probe to ensure the good contact between the probe and the sample without damaging the sample.
8. The probe is designed with coaxial shielding layer to reduce electromagnetic interference to measurement.
9. The platinum-iridium alloy is selected as probe electrode, which can effectively reduce the contact resistance and has good high temperature oxidation resistance.
10. Bring calibration parts with each test instrument to calibrate test fixture.
Main technical parameters:
1. Measuring Temperature Range: RT~600 C or RT~800 C or RT~1200 C is optional.
2. Test Probes: Two High Temperature and High Frequency Probes or Four High Frequency Probes
3. Electrode diameter: 26.8mm
4. Sample size: less than 10 mm in thickness and 5-40 mm in diameter
5. Temperature Control: Constant Temperature, Variable Temperature and Normal Temperature
6. Temperature Control Accuracy: +0.4 C
7. Resistivity: 10n-10MΩ
8. Resistance: 10n-100MΩ
9. Conductivity: 10-5-105 s/cm
10. Weight: 38KG
11. Working Temperature: 5 40 C
12. Weight: 15K
13. Can cooperate with any type of Agilent, Wayne Ker, So lar tron, Tonghui, Keysight
Seamless Combination of Equal LCR Table

14. The equipment can cooperate with ZJ-3 and ZJ-6 piezoelectric testers to measure piezoelectric D33 coefficients.