沈樵综合在线,一区二区三区乱码,免费资源一区二区三区,91超碰碰,av极品一线天,日韩免费高清一区二区,国产蜜尤福利在线,嗯啊91在线观看,精品一区二三

| 注冊| 產品展廳| 收藏該商鋪

行業產品

當前位置:
陜西南業電力設備有限公司>>高壓避雷器>> HY5WX-51/134高壓避雷器廠家

HY5WX-51/134高壓避雷器廠家

返回列表頁
  • HY5WX-51/134高壓避雷器廠家
  • HY5WX-51/134高壓避雷器廠家
  • HY5WX-51/134高壓避雷器廠家
  • HY5WX-51/134高壓避雷器廠家
  • HY5WX-51/134高壓避雷器廠家
收藏
舉報
參考價 面議
具體成交價以合同協議為準
  • 型號
  • 品牌
  • 廠商性質 生產商
  • 所在地 西安市
在線詢價 收藏產品 加入對比

聯系方式:王凱龍查看聯系方式

更新時間:2021/02/23 09:29:36瀏覽次數:242

聯系我們時請說明是儀表網上看到的信息,謝謝!

同類優質產品

更多產品

產品簡介

產地 國產 加工定制 是
HY5WX-51/134線路型高壓避雷器是一種為各種電子設備、儀器儀表、通訊線路提供安全防護的電子裝置。當電氣回路或者通信線路中因為外界的干擾突然產生尖峰電流或者電壓時,浪涌保護器能在極短的時間內導通分流,從而避免浪涌對回路中其他設備的損害。HY5WX-51/134高壓避雷器廠家

詳細介紹

一、概述
   交流輸變電線路用有機復合外套氧化鋅避雷器并聯連接于絕緣子(串)的兩端,是為了限制線路雷電過電壓,提高線路的耐雷擊水平,降低系統因雷擊故障引起的跳閘率而專門設計的一種新型避雷器。安裝方式主要為懸掛式(懸掛于輸電桿塔上),也可座樁式安裝。本公司生產的線路用復合外套金屬氧化鋅避雷器(懸掛式、座樁式)主要用于10~220kv交流電力輸變電系統中,用來限制輸變電線路可能出現的各種過電壓,以保證輸變電線路的安全運行。 HY5WX-51/134高壓避雷器廠家
    產品生產執行的標準為GB11032-2000(eqv IEC60099-4:1991)《交流無間隙金屬氧化物避雷器》、JB/T8952-2005《交流系統用復合外套無間隙金屬氧化物避雷器》、JB/T10497-2005《交流輸電線路用復合外套用串聯間隙金屬氧化物避雷器》、JB/T8459-2006《避雷器產品型號編制方法》。HY5WX-51/134高壓避雷器廠家


二、產品特點
    1.整體模壓成型,密封性能好,結構特殊,防潮防爆;
    2.散熱性能好,具有較大的過電壓吸收能力;
    3.體積小重量輕,安裝靈活耐碰撞,抗拉強度高,運輸無破損。
    4.適宜安裝在耐雷水平較低雷擊跳閘率偏高的輸電線路;干旱少雨的丘陵、山區;接地電阻較高的桿塔、大跨距的過江桿塔;操作過電壓較高,需要對進入變電站前進行限制的場合;嚴重污穢的地區。


三、使用條件
    1.環境溫度為:-40℃~+40℃;
    2.海拔高度不超過2000m(高原地區訂貨時應說明);
    3.電源頻率為48Hz~62Hz;
    4.大風速不超過35m/s;
    5.地震裂度7度及以下地區;
    6.避雷器允許擺動,根據塔形,考慮懸掛方式及座樁方式。

I. overview

The organic compound coated zinc oxide arrester used in AC transmission lines is connected in parallel to the two ends of insulators (series). It is a new type of arrester specially designed to limit lightning overvoltage of lines, improve lightning resistance level of lines and reduce tripping rate of systems caused by lightning faults. Installation mode is mainly suspended (suspended on transmission tower) or pile-type installation. The compound coat metal zinc oxide arrester (suspension type, pile type) produced by our company is mainly used in 10-220 kV AC power transmission and transformation system, which is used to limit various kinds of overvoltages that may occur in transmission and transformation lines, so as to ensure the safe operation of transmission and transformation lines.

The standards for product production implementation are GB11032-2000 (eqv IEC 60099-4:1991), "AC Gapless Metal Oxide Arrester", "JB/T8952-2005" Composite Coat Gapless Metal Oxide Arrester for AC System","JB/T10497-2005"Composite Coat Series Gap Metal Oxide Arrester for AC Transmission Line", "JB/T8459-2006" Method for Making Product Types of Arrester.

II. Product Characteristics

1. Integral moulding, good sealing performance, special structure, moisture-proof and explosion-proof;

2. It has good heat dissipation performance and large over-voltage absorption capacity.

3. Small size, light weight, flexible installation, anti-collision, high tensile strength, no damage to transport.

4. It is most suitable to install transmission lines with low lightning resistance and high lightning trip-out rate; hilly and mountainous areas with drought and little rain; poles with high grounding resistance and long-span river-crossing poles; occasions with high operating overvoltage, which require restrictions before entering substations; and areas with serious pollution

III. Conditions of Use

1. The ambient temperature is -40 +40.

2. The altitude should not exceed 2000m.

3. The frequency of power supply is 48 Hz~62 Hz.

4. The maximum wind speed does not exceed 35m/s.

5. Areas with seismic fissure of 7 degrees or less;

6. Lightning arrester is allowed to swing. According to tower shape, suspension mode and pile-sitting mode are considered.

會員登錄

×

請輸入賬號

請輸入密碼

=

請輸驗證碼

收藏該商鋪

請 登錄 后再收藏

提示

您的留言已提交成功!我們將在第一時間回復您~