紙張水份測定儀配置探頭選型

配合Delmhorst P-2000及RDM-3P設計的各種類型的紙品用探針，適用于多種工作情況下的濕度測量。
                                                                                                                                              H-4/830-2

Electrode handle and 10" coaxial prod for measuring moisture content in bales.

電極手柄及10"同軸刺針可用作捆綁紙料的水分含量測量。
                                                                                                      
2-E

Pin type, maximum penetration 5/16". Used on curved surfaces such as cardboard and paper tubes especially if of small diameter.

小針型，zui大刺入深度為5/16"。被用于探測彎曲的表面，例如紙卡板及紙管、紙卷，尤其適用于小直徑紙料。

Pin type, with two rows of four pins each, maximum penetration 1/8". Penetration can be adjusted according to stock thickness by means of gauge block.

小針型，共兩排，四支針每排，zui大刺入深度為1/8".刺入深度可根據被測物料厚度通過量塊來自行調節。
                                                                                                      19-E

Blade type for measuring of paper on skids. Blades are 5" long. Longer blades available on special order.

刀鋒型，長5"，用作測量正在滑動的紙品。依照特別要求，可提供更長的刀鋒。
                                                                                                      43-E

Clamp type for testing thin sheet stock. The sample tested is compressed between two smooth discs.

夾持型，用作薄紙品的測量。測試過程中，被測樣品通過兩張光滑碟片被壓縮。
                                                                                                      
55-E

Leaf type for measuring moisture content on a moving web or roll. Can be used with a portable unit or for stationary installation.

葉片型，用作測量正在運動中的網狀或滾筒狀紙品?？梢允褂迷诒銛y式裝置或固定型裝置上。