9206單/多通道USB采集放大器

“即插即測"設計，通過PC USB端口進行簡單連接，分辨率高達24位，高達每秒1200次測量的高速測量，可以將多個接口聯網

Features
- 便宜的“即插即測"設計
- 通過PC USB端口輕松連接
- 24位分辨率
- 高達1200讀數/秒的高速測量。
- 便捷的配置和分析軟件DigiVision
- Pt100作為選件
- LabVIEW和DLL驅動免費提供
- 集成在客戶擁有的軟件中
- 6線技術帶來的精度
Description

In the field there is a frequent need to measure sensor readings rapidly and easily right at the sensor and to transfer them directly to a PC without additional amplifiers or converters. The 9206 USB sensor interface can satisfy this requirement admirably, thanks to its ?plug & measure“ design. The USB connection means installation could not be simpler.

Typical applications:
- test measurements via laptop
- Laboratory test set-ups
- Instrumentation and control
- Diagnostic measurements in the chemical industry
- PC-based recording of expansion figures in bio engineering
The USB sensor interface takes its supply from the connected PC via the USB port, and uses it to generate the power supply for the sensors. The initial settings and sensor settings are made by burster in-house and saved in the USB sensor interface. These can then be fine-tuned by the customer.

Software provides display and archiving functions. But a license key enables an open-end expansion. 32 interfaces output curves may be displayed at the same time. One USB sensor interface can be connected as standard. Each sensor can be tared individually, and measurement curves can be displayed jointly or separately in a graph. We can configure the interface to suit a specific sensor, although customer-specific parameters can be changed using the free analysis software supplied.

The connection to LabVIEW or the integration into customers’ software is enabled by a free driver package
Downloads

Data sheet

9206資料參數
英
LINKS & CAD DATA