手提式PH計(jì):
BASIC CON：suitcase，9V battery ，combination PH sensor，buffer 7.00and4.00， manual。
一、 Panel instruction
l ON/OFF ： power switch
l MODE ： function switch，
Repeating：PH →MV→ TEMP every press
l CALIB ： 7.00 calibration (6.86)
l SLOP ： 4.00 calibration (9.18、10.01)
l TEMP ： temp compensation manually
二、 Easy to operate
1、Put the sensor in water , Turn the power on ,ａnd LCD display current PH value ,if you need to calibrate , please check the calibration part of the manual. Wait for the reading to stabilize. It needs a few minutes to equalize the temp and all the condition .
2、 Change a ORP sensor if you want to measure ORP in a solution ,THEN press the MODE key when you’ve changed your sensor。
3、 For Temp compensation , you can easily turn the TEMP knob to the temp in witch the solution is。
三、 PH Calibration
1、Put the clean PH sensor into buffer 7.00，a few agitation，wait for the reading to stabilize(suggest at least 5mins)，turn CALIB knob to make the value reach 7.00 steadily。Recommend tuning slowly.
2、Wash the sensor with distilled water and wipe it with soft tissue。
3、Put the clean PH sensor into buffer 4.00(or 9 .18)， agitate a little，wait for the reading to stabilize(suggest at least 5mins)，turn CALIB knob to make the value reach 4.00(or 9.18) steadily。
4、You may repeat the calibration process for 2-3 times for accuracy。
NOTE：1、When calibrate ORP sensor please select the right ORP standard。
2 pH sensor ‘s Temp range is 0-80℃
3、PH value is a parameter related to Temp, for accurate measure temp compensation is necessary .
4、storage for a long time ,such as weeks or months ,the sensor should be cleaned sufficiently。
會(huì)員1.png)
望城县|
罗平县|
永善县|
云南省|
大新县|
江口县|
始兴县|
沙河市|
静安区|
南平市|
朝阳县|
泽普县|
扎兰屯市|
霞浦县|
静安区|
屏东市|
双柏县|
大余县|
鸡东县|
常山县|
西乡县|
河南省|
罗定市|
新宾|
镇赉县|
白玉县|
盈江县|
方正县|
灵川县|
哈尔滨市|
九寨沟县|
汝城县|
锦屏县|
雷山县|
邛崃市|
惠州市|
汶上县|
南靖县|
江都市|
深州市|
晋中市|