1 GHz to 6 GHz 200 Watt Single Bａnd Power Amplifier
- Class A Operation
- Touch Screen Color display
- Input Overdrive Protection
- USB, Ethernet, GPIB and RS232
interface - Built in Calibrated Directional Coupler
Description
New class A, high power density, design has allowed us to produce a 200 watt, 1.0 GHz to 6 GHz amplifier in a compact 4U package. With a minimum of 200 watts of linear power this amplifier is ideal for RF immunity testing in a GTEM Cell or with a wide range of available horn antenna such as the Teseq BHA range. Readily integrated with the Teseq ITS 6006 80 MHz to 6 GHz test system these amplifiers can form part of a broadbａnd test system. The new touch screen colour display gives an immediate visual indication of forward and reverse power along with the current operating status of the amplifier and access to diagnostic information such as gate current and heatsink temperature.Fan speed adjusts depending on the heatsink temperature thus ensuring the minimum audio noise level possible in the operating environment. The inbuilt calibrated forward power coupler provides a quick and easy way to monitor forward power with any power meter. Input overdrive protection prevents damage to the input devices due to accidental high input power. Multiple remote interfaces are available as standard including USB, GPIB, RS232, and Ethernet. Amplifier gain can be controlled either remotely through one of the available interfaces or via the front panel touch screen.
Key Parameters
| Frequency | 1.0 GHz to 6.0 GHz |
| Saturated Power | 250 W minimum (290 W nominal) |
| Power at P1 dB | 200 W minimum (230 W nominal) |
| Gain | 53 dB |
| Gain Flatness | +/-3 dB |
Additional RF Data
| Harmonics at 200 W | -18 dBc (Typical) |
| Maximum Input without Damage | +10 dBm |
| Spurious | -60 dBc |
| Stability | Unconditionally stable |
| Load VSWR without damage (All Phase Angles) | Infinite |
| RF Input | Type N (socket) |
| RF Output | Type N (socket) |
| Gain Control | 0 – 30 dB in 255 steps |
Impedance/VSWR
| Output Impedance | 50 Ω |
| Input VSWR | 2:1 |
| Output VSWR | 2:1 |
Interfaces and Electrical
| Interface | Touch screen, GPIB, RS232, Ethernet & USB |
| Safety Interlock | BNC Connector, Open for Standby |
| Supply Voltage | 90 –264 Vac |
| Supply Frequency | 47–63 Hz |
| Supply Power Requirement | < 2 KVA (typical full power) |
Physical and Environmental
| Dimensions | 7U, 19 Inch Rack width, 615 mm deep |
| Weight | 50 kg |
| Temperature Operational | 0 °C–40 °C |
| Temperature Non Operating | -40 °C–85°C |
| Humidity (Non Condensing) | 95% |
Options: To be specified at time of ordering
| Rear Panel RF Connectors | CBA 6G-200D-10 |
| Front Panel RF Connectors | CBA 6G-200D |
會(huì)員1.png)
慈溪市|
长葛市|
宝兴县|
龙岩市|
陵水|
青海省|
白玉县|
孝义市|
林西县|
杭锦后旗|
宜黄县|
绵竹市|
克什克腾旗|
顺平县|
勃利县|
合肥市|
根河市|
阿勒泰市|
绥棱县|
棋牌|
赞皇县|
皮山县|
会理县|
资阳市|
通河县|
漠河县|
广南县|
万载县|
临猗县|
长寿区|
孙吴县|
南溪县|
卢湾区|
江孜县|
开封市|
共和县|
永川市|
油尖旺区|
夏津县|
秀山|
龙岩市|