1 GHz to 6 GHz 400 Watt P1dB Single Bａnd Power Amplifier
- Class A Operation
- Touch Screen Color display
- Input Overdrive Protection
- USB, Ethernet, GPIB and RS232
interface - Built in Calibrated Directional Coupler
Description
New class A, high power density, design has allowed us to produce a 400 watt, 1.0 GHz to 6 GHz amplifier in a 20U package. With a minimum of 400 watts of linear power this amplifier is ideal for RF immunity testing in a GTEM Cell or with a wide range of available horn antenna such as the Teseq BHA range. Readily integrated with the Teseq ITS 6006 80 MHz to 6 GHz test system these amplifiers can form part of a broadbａnd test system. The new touch screen colour display gives an immediate visual indication of forward and reverse power along with the current operating status of the amplifier and access to diagnostic information such as gate current and heatsink temperature.Fan speed adjusts depending on the heatsink temperature thus ensuring the minimum audio noise level possible in the operating environment. The inbuilt calibrated forward power coupler provides a quick and easy way to monitor forward power with any power meter. Input overdrive protection prevents damage to the input devices due to accidental high input power. Multiple remote interfaces are available as standard including USB, GPIB, RS232, and Ethernet. Amplifier gain can be controlled either remotely through one of the available interfaces or via the front panel touch screen.
Key Parameters
| Frequency | 1.0 GHz to 6.0 GHz |
| Saturated Power | 500 W minimum |
| Power at P1 dB | 400 W minimum |
| Gain | 56 dB |
| Gain Flatness | +/-3 dB |
Additional RF Data
| Harmonics at 400 W | -18 dBc (Typical) |
| Maximum Input without Damage | +10 dBm |
| Spurious | -60 dBc |
| Stability | Unconditionally stable |
| Load VSWR without damage (All Phase Angles) | Infinite |
| RF Input | Type N (socket) |
| RF Output | Type 7/16 (socket) |
| Gain Control | 0 – 30 dB in 255 steps |
Impedance/VSWR
| Output Impedance | 50 Ω |
| Input VSWR | 2:1 |
| Output VSWR | 2:1 |
Interfaces and Electrical
| Interface | Touch screen, GPIB, RS232, Ethernet & USB |
| Safety Interlock | BNC Connector, Open for Standby |
| Supply Voltage | 200 - 240 VAC Line to Line 380 - 415 VAC Line to Neutral |
| Supply Frequency | 47–63 Hz |
| Supply Power Requirement | < 5.5 KVA (typical full power) |
Physical and Environmental
| Dimensions | 20U, 19 Inch Rack width, 1000 mm deep |
| Weight | 160 kg |
| Temperature Operational | 0 °C–40 °C |
| Temperature Non Operating | -40 °C–85°C |
| Humidity (Non Condensing) | 95% |
Options: To be specified at time of ordering
| Rear Panel RF Connectors | CBA 6G-400D-10 |
| Front Panel RF Connectors | CBA 6G-400D |
焦作市|
洞头县|
上杭县|
三江|
渝北区|
绿春县|
图木舒克市|
泉州市|
杭锦后旗|
云阳县|
彭山县|
桃园县|
驻马店市|
通州区|
萨嘎县|
北票市|
衡南县|
陵水|
鹤山市|
班戈县|
景宁|
武清区|
兴城市|
安宁市|
南川市|
山阴县|
金平|
和林格尔县|
上犹县|
齐河县|
介休市|
永胜县|
维西|
万山特区|
平邑县|
军事|
罗平县|
东乌珠穆沁旗|
潍坊市|
卓资县|
梓潼县|