VTON 威盾閥門流量計在光通信和算力工廠的應用案例

伴隨 AI 算力網絡、5G 通信需求爆發，中天科技啟動印尼雅加達特種光纖二期擴產項目，擴建特種光纖預制棒、光纖拉絲、涂覆成纜完整產線，重點生產 G.657 彎曲不敏感特種光纖、高速多模光纖，面向北美、東南亞市場供貨，依托印尼基地實現產能外遷，優化貿易關稅風險。 廠區包含預制棒制備特種工藝氣體管路、超純水 UPW 系統、光纖拉絲塔冷卻循環水、涂覆化學品供料、工藝廢水處理、全廠公用工程氣水系統六大流體板塊。威盾 VTON 為本項目 EPC 總包提供全套閥門、流量計流體控制成套設備，服務工廠建設及后期生產運維采購。

項目痛點

1. 光纖預制棒 VAD/OVD 氣相沉積工藝，對特種工藝氣體、高純化學品輸送流量穩定性要求高，流量波動會直接造成預制棒內部缺陷，降低特種光纖成品良率；涂覆工序接觸有機溶劑，介質具備腐蝕性；

2. 超純水系統對管路潔凈度、無析出、零泄漏要求嚴苛，閥體雜質析出會直接污染光纖涂覆層；

3. 工況介質種類多：高純工藝氣體、冷卻乙二醇、酸堿廢水、有機溶劑化學品，需要多類型流量計覆蓋大流量、微小流量不同工況；

4. 印尼進口設備需要滿足 SNI 準入，原產地證、材質光譜報告、CE 認證、出廠檢測報告整套單證，資料缺失會發生扣關，拖累擴產工期；

5. 印尼熱帶高溫高濕海島環境，設備需要耐受濕熱鹽霧；儀表閥門支持 DCS 自動化通訊；項目工期緊張，需要跨境分批出貨、遠程調試、快速備件補給。

威盾 VTON 完整交付方案（閥門 + 流量計明細）

流量計產品

1. 襯四氟電磁流量計：超純水循環管路、酸堿工藝廢水大流量計量，4?20mA / Modbus?RTU 輸出，對接工廠 DCS 控制系統；

2. 哈氏合金金屬管浮子流量計：涂覆有機溶劑、微量化學藥劑小流量精準測控，適配光纖涂覆工藝微量給藥；

3. 熱式氣體質量流量計：預制棒車間氮?dú)?、氬氣等特種保護氣體流量測量，保障氣相沉積工藝氣體配比穩定；

4. 渦輪流量計：拉絲塔乙二醇冷卻循環水回路流量監測，實時監控拉絲設備散熱工況。

閥門產品

1. 哈氏合金內件氣動調節閥：化學品、特種工藝氣體管線流量壓力精密調節，適配預制棒制備、光纖涂覆腐蝕介質；

2. PTFE 襯氟球閥、襯氟隔膜閥：超純水、有機溶劑管路通斷，高潔凈無析出，避免介質二次污染；

3. 高純 316L 不銹鋼氣動球閥：冷卻循環水、壓縮空氣、保護氣體公用管路開關控制；

4. 緩閉止回閥：循環水泵出口，抑制水錘，防止介質倒流，保護拉絲塔冷卻系統；

5. Y 型過濾器、防爆電磁閥：管路雜質過濾、工藝管路緊急切斷保護。

配套項目服務 全套產品提供 CE 證書、材質光譜報告、出廠檢測報告、原產地證書，整理印尼 SNI 清關全套技術文檔；支持美元跨境結算，配合 EPC 分柜分批出運；提供中英雙語技術手冊，遠程調試指導，可提供跨境備件供貨，適配印尼工廠長期運維。

項目?jī)r(jià)值

1. 高精度耐腐蝕閥表保障預制棒氣相沉積、光纖涂覆工藝穩定，減少流量波動帶來的產品缺陷，保障 G.657 特種光纖生產良率；

2. 一站式流體成套供貨，覆蓋氣體、純水、化學品、冷卻水、廢水全工況，降低 EPC 多方采購對接成本；

3. 完整合規技術單證，保障設備順利印尼清關，保障中天科技印尼特種光纖擴產項目建設節點；

4. 設備適配印尼熱帶濕熱鹽霧環境，流體系統穩定運行，支撐特種光纖產能爬坡，成品合規出口北美市場，完成關稅優化海外產能布局；

5. 整套方案具備可復制性，可用于東南亞其他光纖預制棒、拉絲、光纜出海制造項目選型參考。

ZTT Indonesia Special?Optical?Fiber Capacity Expansion Project｜VTON Complete Solution of Valves & Flow Meters for Overseas Preform & Drawing Production Line

Driven by surging demand for global AI computing network and 5G communication, ZTT launches phase?2 capacity?expansion project for special?optical?fiber plant near Jakarta, Indonesia. New production lines for optical?fiber preform manufacturing, fiber drawing and coating?cabling are built, focusing on G.657 bend?insensitive special fiber and high?speed multimode fiber for North?American and Southeast?Asian customers. The Indonesia?based manufacturing layout optimizes trade?tariff risks. The plant covers six major fluid?system modules: special?gas pipeline for preform VAD/OVD deposition, UPW ultrapure?water system, drawing?tower cooling?water circulation, coating?chemical feeding, process wastewater treatment and plant?wide utility gas?water system. VTON delivers full?set valves and flow?meters fluid?control package for EPC contractor, supporting plant construction and long?term O&M procurement.

Project Challenges

1. VAD/OVD vapor?deposition process for optical preform requires      ultra?stable flow of special process gas and high?purity chemicals. Minor      flow fluctuation will trigger internal defects on preform and reduce yield      of special optical fiber. Organic solvents used in coating process are      corrosive.

2. UPW system demands high?purity piping with zero?leakage and no?precipitation.      Impurity precipitation from valves will contaminate fiber coating layer.

3. Wide?range media including high?purity process gas, glycol      coolant, acid?alkali wastewater and organic solvents. Multiple flow?meter      types are required for large?flow and micro?flow conditions.

4. Indonesian SNI import compliance requires complete documents:      certificate of origin, material spectroscopy reports, CE certificates and      factory inspection reports. Missing paperwork may cause customs detention      and delay expansion schedule.

5. Tropical hot?humid coastal climate with salt?fog corrosion.      Instruments and valves shall support DCS communication. Tight timeline      requires split cross?border shipment, remote commissioning and fast spare?parts      delivery.

VTON Full Delivery Scope (Valves & Flow Meters List)

Flow Meters

1. PTFE?lined electromagnetic flow meters: Measure large?flow rate      for UPW circulation and acid?alkali wastewater; 4?20?mA / Modbus?RTU output for DCS integration.

2. Hastelloy metal?tube rotameters: Precise micro?flow measurement      & control for coating organic solvents and trace chemical dosing for      fiber?coating process.

3. Thermal gas mass flow meters: Measure protective gas such as      nitrogen and argon in preform workshop, to stabilize gas?mixing ratio for      vapor?deposition process.

4. Turbine flow meters: Monitor glycol cooling?water loop flow for      fiber?drawing towers, track heat?dissipation status of drawing equipment.

Valves

1. Pneumatic control valves with Hastelloy trim: Precise pressure      & flow regulation for chemical and special?gas pipelines, compatible      with corrosive media for preform production and fiber coating.

2. PTFE?lined ball valves & PTFE?lined diaphragm valves: On?off      for UPW and organic?solvent pipelines, high?purity non?precipitation      design to avoid secondary medium contamination.

3. High?purity 316L stainless?steel pneumatic ball valves: On?off      control for cooling?water, compressed?air and protective?gas utility      pipelines.

4. Slow?closing check valves: Installed at circulation?pump      outlets to suppress water?hammer and prevent reverse flow, protecting      drawing?tower cooling system.

5. Y?strainers & explosion?proof solenoid valves: Pipeline      impurity filtration and emergency shut?off protection.

Supporting Services Full?set CE certificates, material spectroscopy reports, factory inspection reports and certificate of origin are provided. Complete technical documentation for Indonesian SNI customs clearance is compiled. USD cross?border payment is supported for EPC container?by?container phased shipment. Bilingual technical manuals, remote commissioning guidance and cross?border spare?parts supply are available for long?term local plant maintenance.

Project Benefits

1. High?precision anti?corrosion valves & instruments      stabilize preform vapor?deposition and fiber?coating processes, minimize      product defects caused by flow fluctuation and guarantee yield of G.657      special optical fiber.

2. One?stop fluid?control package covers gas, ultrapure water,      chemicals, cooling?water and wastewater, lowering multi?vendor procurement      workload for EPC contractors.

3. Complete compliance documents ensure smooth customs clearance      and keep milestone of ZTT Indonesia special?fiber expansion project on      track.

4. Equipment is well?adapted to tropical hot?humid salt?fog      environment in Indonesia. Stable fluid systems support capacity ramp?up.      Finished fibers can be exported to North?America with tariff?optimized      overseas production layout.

5. This replicable solution can be referenced for other overseas      optical?fiber preform, drawing and cabling manufacturing projects across      Southeast Asia.