CMP電纜夾套(CMP Huron LDAL cable cleat)
上海頤品自動化科技有限公司,:
CMP Huron cable cleats are metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ IEC 61914:2009 to ensure the securing and retention of cables, without sustaining damage to the cable(s).
The Huron range of cable cleats are fabricated from 5000 series aluminium and are available in 23 sizes to suit cable diameters 19mm to 128mm.
The Huron cable cleat has three M10 fixing clearance holes within one base, allowing versatility to the installer during installation to use either one M10 bolt or two M10 bolts, and is designed to enable the product to be secured to a variety of mounting surfaces. The Huron cable cleats hinge opens fully allowing the cables to be easily placed within the cable cleat to aid the installer before closing and securing via the mouth piece bolt.
The Huron cable cleats come with Low Smoke & Fume (LFS), Zero Halogen (LS0H) and Phosphorus Free (LSF) liners as standard, helping to restrain the cable(s) within vertical applications, This provides a layer of protection between the cable sheath and the cable cleat during normal operation, where thermal elongation of cables occur, protecting the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The Low Smoke & Fume (LFS), Zero Halogen (LS0H) and Phosphorus Free liners also assist in the extra protection of cable(s) in the event of short circuit fault conditions.
- Third party certification to IEC 61914:2009
- 5000 series aluminium
- 19 – 128mm in 23 sizes for trefoil formation / application
- Short circuit rating of 84kA peak fault
- Operating temperature -50°C to +60°C
- Low Smoke & Fume (LFS), Zero Halogen (LS0H) and Phosphorus Free as standard
- Combined single (M10) or two bolt (M10) fixing design
| Short Circuit Testing to IEC 61914:2009 - Clause 9.5 | |
| Trefoil Formation | |
| One short circuit (6.4.3) 300mm fixed cleat centres | Two short circuits (6.4.4) 300mm fixed cleat centres |
| 0.1 sec | 0.1 sec |
| 84kA Peak | 84kA Peak |
| 40.5kA RMS | 40.5kA RMS |
| 300mm CAT 1 Huron LDAL (0.1 sec) | |
| Cable OD (mm) | Peak kA |
| 36 | 84.0 |
| 38 | 86.3 |
| 43 | 91.8 |
| 59 | 107.5 |
| 65 | 112.9 |
PRODUCT SELECTION TABLE
CLICK HERE TO VIEW TECHNICAL ILLUSTRATION
TECHNICAL ILLUSTRATION

Showing: Imperial Metric
| Huron Part No. | Cable Ø Range Take (mm) | Dimensions (mm) | Weight (g) | |||||
| W | H | D | P | Fixing Hole Ø | ||||
| D1 | D2 | |||||||
| LDAL019023 | 19-23 | 100.0 | 87.0 | 54.0 | 25.0 | 2 x M10 | 1 x M10 | 213 |
| LDAL023028 | 23-28 | 104.0 | 88.0 | 54.0 | 25.0 | 2 x M10 | 1 x M10 | 235 |
| LDAL027032 | 27-32 | 106.0 | 97.0 | 54.0 | 25.0 | 2 x M10 | 1 x M10 | 242 |
| LDAL030035 | 30-35 | 108.0 | 103.0 | 54.0 | 25.0 | 2 x M10 | 1 x M10 | 248 |
| LDAL033038 | 33-38 | 110.0 | 107.0 | 54.0 | 25.0 | 2 x M10 | 1 x M10 | 251 |
| LDAL036042 | 36-42 | 132.0 | 108.0 | 54.0 | 50.0 | 2 x M10 | 1 x M10 | 295 |
| LDAL040046 | 40-46 | 134.0 | 113.0 | 54.0 | 50.0 | 2 x M10 | 1 x M10 | 302 |
| LDAL044050 | 44-50 | 136.0 | 121.0 | 54.0 | 50.0 | 2 x M10 | 1 x M10 | 309 |
| LDAL048055 | 48-55 | 138.0 | 127.0 | 54.0 | 50.0 | 2 x M10 | 1 x M10 | 320 |
| LDAL051058 | 51-58 | 140.0 | 130.0 | 54.0 | 50.0 | 2 x M10 | 1 x M10 | 326 |
| LDAL055062 | 55-62 | 157.0 | 138.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 363 |
| LDAL059066 | 59-66 | 157.0 | 145.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 371 |
| LDAL063070 | 63-70 | 160.0 | 152.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 378 |
| LDAL067074 | 67-74 | 163.0 | 160.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 386 |
| LDAL071078 | 71-78 | 168.0 | 167.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 395 |
| LDAL074082 | 74-82 | 190.0 | 175.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 444 |
| LDAL077085 | 77-85 | 192.0 | 180.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 450 |
| LDAL082088 | 82-88 | 193.0 | 186.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 455 |
| LDAL088096 | 88-96 | 202.0 | 201.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 472 |
| LDAL096103 | 96-103 | 214.0 | 215.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 486 |
| LDAL103111 | 103-111 | 237.0 | 229.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 545 |
| LDAL111119 | 111-119 | 248.0 | 244.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 561 |
| LDAL119128 | 119-128 | 265.0 | 260.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 591 |
中國區(qū)分銷商:
上海頤品自動化科技有限公司
Shanghai Epin Automation Co.,Ltd.
Website:www.epinautomation。。com
:sales@epinautomation.com
*:
因為專業(yè),所以放心!






































鸡西市|
安徽省|
威信县|
高州市|
濉溪县|
宝鸡市|
紫金县|
大足县|
金塔县|
噶尔县|
银川市|
分宜县|
景谷|
贵南县|
奉化市|
沁阳市|
玉田县|
贵州省|
岗巴县|
清新县|
紫金县|
丰城市|
肇州县|
黄龙县|
扶风县|
内黄县|
鄂托克旗|
商城县|
贵溪市|
介休市|
运城市|
中山市|
绍兴县|
洛隆县|
四子王旗|
菏泽市|
施秉县|
汾西县|
巢湖市|
贵港市|
咸丰县|