CMP HDSS電纜夾套(CMP Sovereign HDSS cable cleat)
上海頤品自動化科技有限公司,:
The CMP Products Sovereign cable cleat range consists of metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ IEC 61914:2009. The Sovereign cable cleat has been designed and tested for high short circuit conditions on cables held in trefoil application / formation, to ensure the securing and retention of cables without damage.
The Sovereign cable cleat is available for trefoil application / formation for diameters of 19mm to 128mm in 23 sizes. The cable cleat is fabricated from 316L stainless steel, giving it high creep strength whilst providing excellent corrosion resistance in the harshest of environments.
The Sovereign cable cleat has one M12 and two M10 fixing clearance holes within its base, allowing versatility to the installer during installation, and is designed to enable the product to be secured to a variety of mounting surfaces. The Sovereign cable cleat hinge opens fully, allowing the cables to be easily placed within the cable cleat, to aid the installer before closing and securing via the mouth piece bolt.
Low Smoke & Fume (LFS), Zero Halogen (LS0H) and Phosphorus Free liners are standard helping to restrain the cables within vertical applications, providing a layer of protection between the cable sheath and the cable cleat during normal operation, where thermal elongation of cable occurs, protecting the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The Low Smoke & Fume (LFS), Zero Halogen (LS0H) and Phosphorus Free liners also assist in the extra protection of cables in the event of short circuit fault conditions.
- Third party certification to IEC 61914:2009
- 316L stainless steel
- 19 – 128mm in 23 sizes for trefoil formation / application
- Short circuit rating of 190kA peak fault
- Operating temperature -50°C to +60°C
- Low Smoke & Fume (LFS), Zero Halogen (LS0H) and Phosphorus Free liners as standard
- Combined single (M12) and two bolt (M10) fixing design
| Short Circuit Testing to IEC 61914:2009 - Clause 9.5 | |||
| Trefoil Formation | |||
| One short circuit (6.4.3) 300mm fixed cleat centres | Two short circuits (6.4.4) 300mm fixed cleat centres | One short circuit (6.4.3) 600mm fixed cleat centres | Two short circuits (6.4.4) 600mm fixed cleat centres |
| 0.1 sec | 1 sec | 0.1 sec | 1 sec |
| 190kA Peak | 96kA Peak | 150kA Peak | 80kA Peak |
| 87.7kA RMS | 46.1kA RMS | 68.2 RMS | 38.1kA RMS |
| 300mm CAT 1 Sovereign HDSS (0.1 sec) | |
| Cable OD (mm) | Peak kA |
| 36 | 190.0 |
| 38 | 195.2 |
| 43 | 207.7 |
| 59 | 243.2 |
| 65 | 255.3 |
PRODUCT SELECTION TABLE
CLICK HERE TO VIEW TECHNICAL ILLUSTRATION
TECHNICAL ILLUSTRATION

Showing: Imperial Metric
| Sovereign Part No. | Cable Ø Range Take (mm) | Dimensions (mm) | Weight (g) | |||||
| W | H | D | P | Fixing Hole Ø | ||||
| D1 | D2 | |||||||
| HDSS019023 | 19-23 | 100.0 | 87.0 | 54.0 | 25.0 | 2 x M10 | 1 x M12 | 417 |
| HDSS023028 | 23-28 | 104.0 | 88.0 | 54.0 | 25.0 | 2 x M10 | 1 x M12 | 450 |
| HDSS027032 | 27-32 | 106.0 | 97.0 | 54.0 | 25.0 | 2 x M10 | 1 x M12 | 465 |
| HDSS030035 | 30-35 | 108.0 | 103.0 | 54.0 | 25.0 | 2 x M10 | 1 x M12 | 473 |
| HDSS033038 | 33-38 | 110.0 | 107.0 | 54.0 | 25.0 | 2 x M10 | 1 x M12 | 485 |
| HDSS036042 | 36-42 | 132.0 | 108.0 | 54.0 | 50.0 | 2 x M10 | 1 x M12 | 570 |
| HDSS040046 | 40-46 | 134.0 | 113.0 | 54.0 | 50.0 | 2 x M10 | 1 x M12 | 581 |
| HDSS044050 | 44-50 | 136.0 | 121.0 | 54.0 | 50.0 | 2 x M10 | 1 x M12 | 594 |
| HDSS048055 | 48-55 | 138.0 | 127.0 | 54.0 | 50.0 | 2 x M10 | 1 x M12 | 616 |
| HDSS051058 | 51-58 | 140.0 | 130.0 | 54.0 | 75.0 | 2 x M10 | 1 x M12 | 627 |
| HDSS055062 | 55-62 | 157.0 | 138.0 | 54.0 | 75.0 | 2 x M10 | 1 x M12 | 704 |
| HDSS059066 | 59-66 | 157.0 | 145.0 | 54.0 | 75.0 | 2 x M10 | 1 x M12 | 718 |
| HDSS063070 | 63-70 | 160.0 | 152.0 | 54.0 | 75.0 | 2 x M10 | 1 x M12 | 733 |
| HDSS067074 | 67-74 | 163.0 | 160.0 | 54.0 | 75.0 | 2 x M10 | 1 x M12 | 748 |
| HDSS071078 | 71-78 | 168.0 | 167.0 | 54.0 | 75.0 | 2 x M10 | 1 x M12 | 764 |
| HDSS074082 | 74-82 | 190.0 | 175.0 | 54.0 | 75.0 | 2 x M10 | 1 x M12 | 863 |
| HDSS077085 | 77-85 | 192.0 | 180.0 | 54.0 | 75.0 | 2 x M10 | 1 x M12 | 873 |
| HDSS082088 | 82-88 | 193.0 | 186.0 | 54.0 | 75.0 | 2 x M10 | 1 x M12 | 883 |
| HDSS088096 | 88-96 | 202.0 | 201.0 | 54.0 | 75.0 | 2 x M10 | 1 x M12 | 914 |
| HDSS096103 | 96-103 | 214.0 | 215.0 | 54.0 | 75.0 | 2 x M10 | 1 x M12 | 942 |
| HDSS103111 | 103-111 | 237.0 | 229.0 | 54.0 | 75.0 | 2 x M10 | 1 x M12 | 1055 |
| HDSS111119 | 111-119 | 248.0 | 244.0 | 54.0 | 75.0 | 2 x M10 | 1 x M12 | 1086 |
| HDSS119128 | 119-128 | 265.0 | 260.0 | 54.0 | 75.0 | 2 x M10 | 1 x M12 | 1122 |
中國區(qū)分銷商:
上海頤品自動化科技有限公司
Shanghai Epin Automation Co.,Ltd.
Website:www.epinautomation。。com
:sales@epinautomation.com
*:
因為專業(yè),所以放心!






































石嘴山市|
保靖县|
宁国市|
济源市|
金阳县|
洛浦县|
浮山县|
文化|
芦山县|
西充县|
朔州市|
顺义区|
灵石县|
富民县|
平和县|
翼城县|
台州市|
晋宁县|
宁安市|
安乡县|
德安县|
阆中市|
娄烦县|
顺昌县|
黔西县|
乌兰浩特市|
塔河县|
固始县|
永平县|
江陵县|
南澳县|
太白县|
体育|
呼伦贝尔市|
莆田市|
安陆市|
喜德县|
遂宁市|
杭锦旗|
且末县|
云龙县|