1,用于可燃氣和腐蝕性氣體中水分測量
2,響應(yīng)時間短
3,高靈敏度和液晶顯示
4,自動調(diào)節(jié)和遠程控制
5,RS232和報警輸出功能
TMA 202
Principle of Operation The P2O5-sensor uses the principle of dissociation of water to hydrogen and oxygen. The sensor element itself consists of a round glass body on which two electrodes are wound at constant distance. Depending on the sensor type these electrodes are either made out of platinum- or rhodium wire. Between these electrodes a thin film of phosphoric acid (H3PO4) is applied. The sensor-current causes the water contained in the acid to dissociate to hydrogen and oxygen. The result of this process is P205 (diphosphorous pentoxyde). P205 is a highly hygroscopic substance which absorbs the water from the sample gas. Through continuous dissociation of the water a balance between the water content of the sample gas and the water which is being dissociated builds up. The electrolysis current is proportional to the water content in the sample gas. It is displayed on the instrument readout after it is processed by the instruments signal amplifier. This principle of measurement can be used on all gases (Cl2, HCl, H2S, H2SO4, HBr, SO2, SF6, CO2, PH3, all inert gases and hydrocarbons) except those which chemically react with phosphoric acid or polimerise. Analyzer
| The Analyzer The new trace moisture-analyzer TMA is fully microprocessor-controlled and is designed to operate in rough field service. The amplifier is a high technology, solid state unit which is available as a desk-, as a portable version and as a 19"-rack. 2 alarm-levels can be set, 5 potentialfree contacts for range identification, one analog output and one serial port RS 232 are integrated. For remote control there are 5 isolated input contacts to switch the ranges externally. The system can be set in 4 modes: manual, RS 232, external, auto-range. The high quality LC-display shows the measuring result in ppm/v, the alarm-levels which are set and also the mode (for example: auto ranging). The cable-clamps of the sensor are of special high quality water proof connectors. After switching on the unit, the instrument automatically does a self-check (zero-/span-control) To measure in explosive hazardous areas the unit will be fitted with safety barrieres (intrinsically-safe, zone 1). A portable unit with rechargeable battery and built in charger is also available.
19"- racks, 3 U and wall mounting enclosures are also available (enclosures with protection-class IP 54/64 on request) Order examples
|




































巴中市|
淮安市|
金沙县|
宣恩县|
灵寿县|
余江县|
泗水县|
天全县|
澳门|
临漳县|
开平市|
祥云县|
中山市|
乌鲁木齐市|
灵台县|
华蓥市|
吐鲁番市|
奎屯市|
茌平县|
珲春市|
安新县|
安顺市|
社旗县|
大同县|
河北区|
腾冲县|
宜昌市|
宁津县|
安西县|
青州市|
拜泉县|
那曲县|
五常市|
长沙县|
探索|
嘉禾县|
克拉玛依市|
精河县|
鄂伦春自治旗|
象山县|
临颍县|