振動位移記錄器VB-8216SD特點
適合所有工業機械振動監測,適合不平衡和松動會引起振動水平增加
*模擬輸出。
*頻率范圍10赫茲- 1千赫，靈敏度相對符合ISO 2954。
*配有振動傳感器和磁性底座的全套專業振動儀表。
*公制和英制顯示單位
*加速度和速度測量。
* rms，峰值，保持測量。
*保持復位按鈕，零按鈕。
*寬頻率范圍。
*數據保存按鈕凍結所需的讀數。
*記憶功能，記錄和最小的閱讀與回憶。
*帶磁性底座的隔振探頭，操作方便。
*實時SD記憶卡數據采集器，它內置時鐘和日歷，實時數據記錄器，采樣時間從1秒到3600秒。
*手動數據是可用的（設定采樣時間為0），在執行手動數據記錄函數時，它可以設置不同的位置（位置）號（位置1到位置99）。
*創新和易于操作，計算機不需要設置額外的軟件，在執行數據采集器，只是把SD卡從表和插入SD卡插入電腦，可以下載的所有測量值和時間信息（年/月/日/時/分/秒）到Excel，然后用戶可以自己進行進一步的數據或圖形分析。
* SD卡容量：1 GB到16 GB。
* LCD背光燈綠色，易于閱讀。
*能自動關機或手動關機。
*數據保持，記錄和最小讀數。
*微機電路，高精度。
* 3／AA（1.5 V）x 6電池或直流9V適配器提供電源。
* PC機接口。
一般規格
| Circuit | Custom one-chip of microprocessor LSI | ||||||||
| circuit. | |||||||||
| Display | LCD size : 52 mm x 38 mm | ||||||||
| LCD with green backlight ( ON/OFF ). | |||||||||
| Measurement | Velocity, Acceleration, Displacement | ||||||||
| Function | Acceleration, Velocity : | ||||||||
| RMS, Peak, Max. Hold. | |||||||||
| Displacement | : | ||||||||
| p-p ( peak-peak ), Max-hold p-p. | |||||||||
| Unit | Measurement | Metric | Imperial | ||||||
| Acceleration | meter/s^2,G | ft/s^2, | |||||||
| Velocity | mm/s, cm/s | inch/s | |||||||
| Displacement | mm | inch | |||||||
| Frequency | 10 Hz to 1 KHz | ||||||||
| range | * | Sensitivity relative during the | |||||||
| the frequency range meet ISO 2954 | |||||||||
| Refer to table 1, page . | |||||||||
| Circuit | Exclusive microcomputer circuit. | ||||||||
| Peak | Acceleration, Velocity : | ||||||||
| Measurement | To measure and update the peak | ||||||||
| value. | |||||||||
| Displacement | : | ||||||||
| To measure and update the peak to | |||||||||
| peak ( p-p ) value. | |||||||||
| Max. Hold | Acceleration, Velocity : | ||||||||
| Measurement | To measure and update the max. peak | ||||||||
| value. | |||||||||
| Displacement | : | ||||||||
| To measure and update the max. | |||||||||
| peak to peak ( p-p ) value. | |||||||||
| Zero Button | Under Acceleration ( RMS ) measurement, | ||||||||
| sensor motionless , press Logger Button | |||||||||
| > 5 seconds. | |||||||||
| Max. Hold Reset | Under Max. hold measurement, press | ||||||||
| Button | Logger Button > 5 seconds. | ||||||||
| Analog output | Export the Vibration analog signal via | ||||||||
| meter's " Vibration analog output terminal ", | |||||||||
| it can connect the " Spectrum analyzer APP " | |||||||||
| or used for other application. | |||||||||
| * When measurement value is | |||||||||
| 100 | m/s^2 , the analog output will | ||||||||
| be approx. AC 250 mV typically. | |||||||||
| Datalogger | Auto | 1 second to 3600 seconds | |||||||
| Sampling Time | @ Sampling time can set to 1 second, | ||||||||
| Setting range | but memory data may loss. | ||||||||
| Manual | Push the data logger button | ||||||||
| once will save data one time. | |||||||||
| @ Set the sampling time to | |||||||||
| 0 second. | |||||||||
| @ Manual mode, can also select the | |||||||||
| 1 to 99 position ( Location ) no. | |||||||||
| Memory Card | SD memory card. 1 GB to 16 GB. | ||||||||
| Advanced | * Set clock time ( Year/Month/Date, | ||||||||
| setting | Hour/Minute/ Second ) | ||||||||
| * Decimal point of SD card setting | |||||||||
| * Auto power OFF management | |||||||||
| * Set beep Sound ON/OFF | |||||||||
| * Set sampling time | |||||||||
| * SD memory card Format | |||||||||
| Data Hold | Freeze the display reading. | ||||||||
| Memory Recall | Maximum & Minimum value. | ||||||||
| Sampling Time | Approx. 1 second. | ||||||||
| of Display | |||||||||
| Data Output | RS 232/USB PC computer interface. | ||||||||
| * | Connect the optional RS232 cable | ||||||||
| UPCB-02 will get the RS232 plug. | |||||||||
| * | Connect the optional USB cable | ||||||||
| USB-01 will get the USB plug. | |||||||||
| Operating | 0 to 50 ℃. | ||||||||
| Temperature | |||||||||
| Operating | Less than 85% R.H. | ||||||||
| Humidity | |||||||||
| Power Supply | * Alkaline or heavy duty DC 1.5 V battery | ||||||||
| ( UM3, AA ) x 6 PCs, or equivalent. | |||||||||
| * DC 9V adapter input. ( AC/DC power | |||||||||
| adapter is optional ). | |||||||||
| Power Current | Normal operation ( w/o SD card save | ||||||||
| data and LCD Backlight is OFF) : | |||||||||
| Approx. DC 15 mA. | |||||||||
| When SD card save the data and LCD | |||||||||
| Backlight is OFF) : | |||||||||
| Approx. DC 36 mA. | |||||||||
| Weight | Meter : | ||||||||
| 515 g/ 1.13 LB. | |||||||||
| Probe with cable and magnetic base : | |||||||||
| 99 g/0,22 LB | |||||||||
| Dimension | Meter : | ||||||||
| 203 x 76 x 38 mm | |||||||||
| Vibration sensor probe: | |||||||||
| Round 16 mm Dia. x 37 mm. | |||||||||
| Cable length : 1.2 meter. | |||||||||
| Accessories | * Instruction manual........................... | 1 PC | |||||||
| Included | * Hard carrying case, CA-06................ | 1 PC | |||||||
| * Vibration sensor with cable............... | 1 PC | ||||||||
| * Magnetic base.................................. | 1 PC | ||||||||
| Optional | SD Card ( 2 G ) | ||||||||
| Accessories | AC to DC 9V adapter. | ||||||||
| USB cable, USB-01. | |||||||||
| RS232 cable, UPCB-02. | |||||||||
| Data Acquisition software,SW-U801-WIN. | |||||||||
加速度
| Unit | m/s^2 | |
| Range | 0.5 to 199.9 m/s^2 | |
| Resolution | 0.1 m/s^2 | |
| Accuracy | ± ( 5 % + 5 d ) reading | |
| @ 160 Hz, 80 Hz, 23 ± 5 ℃ | ||
| Calibration | 50 m/S^2 ( 160 Hz ) | |
| Point | ||
| Unit | G | @ 1 G = 9.8 m/s^2 |
| Range | 0.05 to 20.39 G | |
| Resolution | 0.01 G | |
| Accuracy | ± ( 5 % + 5 d ) reading | |
| @ 160 Hz, 80 Hz, 23 ± 5 ℃ | ||
| Calibration | 50 m/S^2 ( 160 Hz ) | |
| Point | ||
| Unit | ft/s^2 | |
| Range | 2 to 656 ft/s^2 | |
| Resolution | 1 ft/s^2 | |
| Accuracy | ± ( 5 % + 5 d ) reading | |
| @ 160 Hz, 80 Hz, 23 ± 5 ℃ | ||
| Calibration | 50 m/S^2 ( 160 Hz ) | |
| Point | ||
| Unit | mm/s |
| Range | 0.5 to 199.9 mm/s |
| Resolution | 0. 1 mm/s |
| Accuracy | ± ( 5 % + 5 d ) reading |
| @ 160 Hz, 80 Hz, 23 ± 5 ℃ | |
| Calibration | 50 mm/s ( 160 Hz ) |
| Point | |
| Unit | cm/s |
| Range | 0.05 to 19.99 cm/s |
| Resolution | 0. 01 cm/s |
| Accuracy | ± ( 5 % + 5 d ) reading |
| @ 160 Hz, 80 Hz, 23 ± 5 ℃ | |
| Calibration | 50 mm/s ( 160 Hz ) |
| Point | |
| Unit | inch/s |
| Range | 0.02 to 7.87 inch/s |
| Resolution | 0.01 inch/s |
| Accuracy | ± ( 5 % + 5 d ) reading |
| @ 160 Hz, 80 Hz, 23 ± 5 ℃ | |
| Calibration | 50 mm/s ( 160 Hz ) |
| Point |
| Unit | mm |
| Range | 0.014 - 1.999 mm |
| Resolution | 0.001 mm |
| Accuracy | ± ( 5 % + 5 d ) reading |
| @ 160 Hz, 80 Hz, 23 ± 5 ℃ | |
| Calibration | 0.141 mm ( 160 Hz ) |
| Point | |
| Unit | inch |
| Range | 0.001 - 0.078 inch |
| Resolution | 0.001 inch |
| Accuracy | ± ( 5 % + 5 d ) reading |
| @ 160 Hz, 80 Hz, 23 ± 5 ℃ | |
| Calibration | 0.141 mm ( 160 Hz ) |
| Point | |
云梦县|
红河县|
锡林郭勒盟|
东丰县|
龙山县|
龙游县|
台北市|
成武县|
丹凤县|
光泽县|
自贡市|
巢湖市|
永寿县|
连州市|
英超|
广宁县|
敦煌市|
阳谷县|
云梦县|
玉龙|
满洲里市|
平定县|
东莞市|
新宁县|
芦山县|
西峡县|
翼城县|
孟村|
金阳县|
大厂|
镇原县|
明溪县|
钟祥市|
青浦区|
高陵县|
舞阳县|
镇坪县|
蒙山县|
怀宁县|
玛曲县|
资溪县|