型號描述

緊湊型過程調節器 8693 適合集成安裝在 23xx/2103 系列過程調節閥的氣動驅動裝置上，專門針對衛生工藝條件的相關要求設計而成。將過程參數的實際值直接作為 4-20 mA 信號傳輸?shù)?PT100 上，或者作為頻率信號傳輸?shù)皆O備上。過程調節器會根據額定值與實際值的比較結果，計算安裝在下級位置調節器的額定值。借助于模擬的反饋信號，可以將模擬值傳輸?shù)娇刂茖用嫔?。過程和位置調節器的參數化可自動進行。通過帶有背景照明裝置和薄膜鍵盤的大型圖像顯示器或電腦接口，進行簡單操作和大量軟件附加功能的選擇。位置調節器會通過一個無接觸式的模擬位置傳感器檢測閥門位置，期間不會產生磨損。在不消耗自身空氣的情況下，進行單作用或雙作用驅動裝置的控制?？蛇x擇使用通訊端口 Profibus DPV1 或 DeviceNet 以及模擬或二進制反饋信號。

1）緊湊型不銹鋼設計
2）帶有背景照明裝置的圖形顯示器
3）利用過程和位置調節器實現極簡便的調試
4）大量的軟件附加功能
5）驅動裝置里的集成式控制空氣引導系統

Type Description

The compact Process Controller Type 8693 is optimized for integrated mounting on the pneumatic actuators in the process valve series Type 23XX/2103 and is specially designed for the requirements of a hygienic process environment. The actual value of the process factor is directly supplied to the device as 4-20 mA, PT100 or a frequency signal. The process controller calculates the setpoint for the subordinated positioner through the variance comparison. Due to the analogue feedback all analogue values on the controlling level can be transferred. With integrated diagnostic functions operation conditions of the control valve can be monitored. Through status signals, valve diagnostic messages are transmitted according to NAMUR NE107 and recorded as history entries. The parameterization of process controller and positioner can be carried out automatically.The easy handling and the selection of additional software functions are done either on a big graphic display with backlight and keypad or over a PC interface. The Positioner registers the valve position without deterioration through a contact-free, analog position sensor. The control of single or double-acting actuators is done without internal air consumption. Communication interfaces such as Profibus DPV1 or DeviceNet and analogue as well as binary feedback can also be chosen.

1）Compact, robust stainless Steel design
2）Easy start-up by Tune fuction for position and process controller
3）Contact-free position sensor
4）Integrated control air routing with spring chamber aeration
5）Profibus DPV1 or DeviceNet communication (option)

數字式電子氣動過程調節器8693型部分訂貨號如下：

請聯系在線客服！