類金剛石碳 (DLC) 鍍膜硅窗口片

?滿足 MIL-F-48616 和 MIL-C-48497C 的嚴重磨損要求
?3 – 5µm 的高透射率
?惡劣環境的理想選擇
?也提供類金剛石碳 (DLC) 鍍膜鍺窗口片
類金剛石碳 (DLC) 鍍膜硅窗口片在一個表面提供抗反射鍍膜,在另一個表面提供專門設計的 DLC 鍍膜,使這些窗口片非常耐用,是惡劣環境的理想選擇。 DLC 鍍膜表面設計用于承受從 -80 到 +160°F 的溫度循環、持續 72 小時的鹽霧以及沙子和泥漿混合物中 1,000 次擦拭器振蕩。 此外,這些窗口片符合 MIL-F-48616 和 MIL-C-48497C 對嚴重磨損的要求。 硅具有 1150 的努氏硬度和低密度,使其比鍺基板更堅固,并且分別適用于對重量敏感的應用。 類金剛石碳 (DLC) 鍍膜硅窗口片設計為 3 至 5μm,非常適合紅外防御應用,例如熱成像。
通用規格
倒角: | Protective as needed | 有效孔徑 (%): | 85 |
鍍膜: | S1: DLC Coating S2: BBAR (3000-5000nm) | 邊緣: | Fine Ground |
鍍膜規格: | AR: Ravg ≤0.5% @ 3000 - 5000nm | 努氏硬度 (kg/mm2) : | 1150 |
基材: | Silicon (Si) | 平行度(弧分): | <3 |
表面平整度: | λ/10 @ 10.6μm | 波長范圍 (nm): | 3000 - 5000 |
表面質量: | 40-20 | Coating Adhesion: | AR: per MIL-C-48497C DLC: per MIL-C-48497C |
Coating Salt Spray: | AR: N/A ≥72 Hours per MIL-C-675 | Coating Solubility and Cleaning: | AR: per MIL-C-48497 DLC: per MIL-C-48497 |
Coating Abrasion: | AR: Moderate, per MIL-C-48497C DLC: Severe, per MIL-C-48497C | ||
Coating Salt Solubility: | AR: N/A DLC: ≥24 Hours Immersion per MIL-C-675C | ||
Coating Humidity: | AR: 24 Hours per MIL-C-48497C DLC: 24 Hours per MIL-C-48497C | ||
Coating Wiper Durability: | AR: N/A DLC: ≥1,000 Wipes of Sand/Slurry per TS-1888 | ||
Coating Temperature (°F): | AR: -80 to +160 per MIL-C-48497C DLC: -80 to +160 per MIL-C-48497C | ||
注意 | Arrow on substrate edge points towards DLC coated surface | ||
產品型號
Dia. (mm) | 厚度 (mm) | 鍍膜 | 產品編碼 |
25.40 | 2.00 | S1: DLC Coating S2: BBAR (3000-5000nm) | #16-816 |
50.80 | 3.00 | S1: DLC Coating S2: BBAR (3000-5000nm) | #16-817 |
76.20 | 3.00 | S1: DLC Coating S2: BBAR (3000-5000nm) | #16-818 |
技術信息
Coating Specifications | ||
Specification | AR Coating | DLC Coating |
Adhesion | per MIL-C-48497C | per MIL-C-48497C |
Abrasion | Moderate, per MIL-C-48497C | Severe, per MIL-C-48497C |
Humidity | 24 Hours per MIL-C-48497C | 24 Hours per MIL-C-48497C |
Salt Solubility | - | ≥24 Hours Immersion per MIL-C-675C |
Salt Spray | - | ≥72 Hours per MIL-C-675 |
Temperature (°F) | -80 to +160 per MIL-C-48497C | -80 to +160 per MIL-C-48497C |
Solubility and Cleaning | per MIL-C-48497 | per MIL-C-48497 |
Wiper | - | ≥1,000 Wipes of Sand/Slurry per TS-1888 |
Coating Temperature (°F) | -80 to +160 per MIL-C-48497C | -80 to +160 per MIL-C-48497C |




































行唐县|
鄂托克前旗|
错那县|
清丰县|
富源县|
温泉县|
萨迦县|
西畴县|
宜都市|
永年县|
阳春市|
吉林市|
永川市|
临城县|
克山县|
积石山|
望奎县|
平和县|
成安县|
杭锦后旗|
龙里县|
固原市|
民权县|
江陵县|
镇沅|
西乌珠穆沁旗|
石渠县|
巴马|
蓬安县|
商南县|
禄劝|
军事|
雷波县|
从化市|
唐河县|
绍兴县|
龙南县|
利川市|
屏南县|
怀宁县|
乾安县|