Bandwidth

DC to ≥20 MHz (-3 dB). Derate with frequency. See Figure 1. (Calculated from Rise Time BW = .35/Rise Time)

Rise time

≤17.5 ns

Max RMS current

150 A

Max peak pulse current

500 A

Minimum sensitivity

5 mA (on oscilloscope's 1 mV/div setting)

AC coupling (on oscilloscopes that support AC/DC coupling)

Current ranges

25 A and 150 A

Max bare-wire voltage

600 V_RMS CAT I and II

300 V_RMS CAT III

TYPICAL CHARACTERISTICS

DC accuracy

±1% typical (3% warranted)

Max amp-second product

25 A range

3,000 aµs

150 A range

15,000 aµs

Insertion impedance

0.03 Ω at 1 MHz

0.075 Ω at 5 MHz

.125 at 10 MHz

.3 at 20 MHz

Signal delay

≈ 21 ns

Displayed RMS noise

≤500 μA_RMS (probe only)

PHYSICALCHARACTERISTICSCONTAINER

Cable length

2 meters (79 in.)

Probe head size

Length

26.8 cm (10.55 in.)

Width

4.1 cm (1.6 in.)

Height

15.6 cm (6.13 in.)

Max conductor diameter

21 mm x 25 mm (0.83 in. x 1.0 in.)

Shipping weight

.7865 kg (1.734 lb.)

Power requirements

TCP0150 is powered directly by oscilloscopes with the TekVPI interface

ENVIRONMENTAL

Temperature

Operating

0 ºC to +50 ºC

Nonoperating

-40 ºC to +75 ºC

Humidity

Operating

5% to 95% RH (Relative humidity) at up to +30 ºC

5% to 85% RH above 30 ºC up to +50 ºC, noncondensing

Nonoperating

5% to 95% RH (Relative humidity) at up to +30 ºC

5% to 85% RH above 30 ºC up to +75 ºC, noncondensing

Altitude

Operating

Up to 2,000 meters (6,560 feet)

Nonoperating

Up to 12,000 meters (40,000 feet)

015-0601-50 

Current loop, 1 turn, 50 Ω with BNC connector used for performance verification

067-1701-xx

TekVPI calibration fixture

067-1686-xx

Cal/Deskew fixture for DPO7000/70000 series