美國EMCEE 1140水分離指數測定儀 1140 MARK X

便攜式微量水分離指數測定儀

便攜式水分離指數測定儀

水分離指數儀

產品說明書

出于質量控制目的，對燃料的水分離特性進行評級，以確定存在的表面活性材料（表面活性劑）的量。表面活性劑會降低用于從燃料中去除水分的過濾器分離器的性能。水的存在會損害發動機性能并引發微生物生長，從而導致油箱腐蝕和燃油管路過濾器堵塞。此外，出于質量控制目的，燃料要經過“透明和明亮”測試，以確定中間餾分油中游離水和顆粒物的含量。

1140型微型分離儀

儀器和測試說明

1140 型微型分離儀是一種機電儀器，用于執行四項離散測試。ASTM標準測試方法D3948（煤油）、D7224（煤油）和 D7261（柴油）用于對水分離特性進行評級，D4860（煤油或柴油）用于檢測游離水和顆粒污染并對其進行數值評級。該儀器只需使用包含適當聚結池的四個“六包”之一即可執行上述四項測試中的每一項。

水分離特性

測試方法 D3948、D7224 和 D7261 采用基于第 5 版 API 認證介質的濁度計、機械混合器和一次性聚結器過濾器。樣品的一部分裝在透明玻璃瓶中，用于將儀表設置為讀數為 100。小瓶中的樣品被丟棄，小瓶被保留。

塑料注射器中樣品的另一部分用于使用混合器制造水/燃料乳液。乳液以編程速率通過過濾器，并將一部分收集在保留的小瓶中。在濁度計中更換小瓶，并對燃料的水分離特性進行評級。

將獲得的值與用于將儀表設置為 100 的未處理樣品進行比較。等級越高，100 為zui大值，表面活性劑含量越少。

游離水和顆粒物污染（透明和明亮）

測試方法 D 4860 將一部分樣品通過過濾介質，過濾介質收集在透明玻璃瓶中。將小瓶放入濁度計中，將儀表調整至100。處理后的燃料被丟棄，將一部分未處理的燃料放入小瓶中，然后重新插入濁度計。等級越高，zui大值為 100，表示游離水和顆粒物較少。

“六件裝”測試消耗品，包括聚結器

圖中顯示了一個通常稱為“六件裝”的盒子，其中包含六個檢測試劑盒。每個測試套件都包含用于執行單個測試的真空包裝消耗品。每個聚結器/過濾器都貼有標簽，以識別燃料的類型和要使用的適用 ASTM 方法。每個六件裝中還包括一個蒸餾水容器，用于進行水分離測試。

鋁聚結器-對航空渦輪機燃料進行ASTM D3948水分離試驗。

· 六件裝，內含六個檢測試劑盒。

· 每個真空包裝的套件都包含消耗品;聚聚器、注射器、蒸餾水、濕巾、小瓶、塞子和移液器吸頭。

M-Cell - 六件裝 （ASTM D7224）

耗材-1140型微型分離儀

M-Cell-對純的航空渦輪機燃料進行ASTM D7224水分離測試。

· 六件裝，內含六個檢測試劑盒。

· 每個真空包裝的套件都包含消耗品;聚聚器、注射器、蒸餾水、濕巾、小瓶、塞子和移液器吸頭。

柴油六包 （ASTM D7261）

耗材-1140型微型分離儀

DBcell-進行ASTM D7261柴油B1-B20水分離試驗。

· 六件裝，內含六個檢測試劑盒。

· 每個真空包裝的套件都包含消耗品;聚聚器、注射器、蒸餾水、濕巾、小瓶、塞子和移液器吸頭。

生物柴油 - 六件裝 （ASTM D7261）

耗材-1140型微型分離儀

D細胞-對純柴油（生物含量小于1%）進行ASTM D7261水分離試驗。

· 六件裝，內含六個檢測試劑盒。

· 每個真空包裝的套件都包含消耗品;聚聚器、注射器、蒸餾水、濕巾、小瓶、塞子和移液器吸頭。

透明明亮的六件裝 （ASTM D4860）

耗材-1140型微型分離儀

透明光亮電池 - 對航空渦輪機和餾分燃料進行 ASTM D4860 水分離測試。

· 六件裝，內含六個檢測試劑盒。

· 每個真空包裝的套件都包含消耗品;聚聚器、注射器、蒸餾水、濕巾、小瓶、塞子和移液器吸頭。

吸管

· 藍色，鋁，50 μL。

· 在水分離測試中進行精密注水時需要。

泡沫盒-1140

· 定制帆布和泡沫，黑色，23 英寸 x 18 英寸 x 10 英寸。

· 專為安全攜帶和收容微型分離儀儀器而設計。

美國EMCEE 1140水分離指數測定儀 1140 MARK X

便攜式微量水分離指數測定儀

便攜式水分離指數測定儀

水分離指數儀

Model 1140 Micro-Separometer

For quality control purposes, water separation characteristics of fuels are rated to determine the amount of surface active materials (surfactants) present. Surfactants degrade the performance of filter separators used to remove water from the fuel. The presence of water can impair engine performance and initiate microbiological growth, which can cause corrosion in tanks and filter plugging in fuel lines. Also for quality control purposes, fuels are subjected to “Clear & Bright” tests to determine the amount of free water and particulate matter in mid-distillates.

Description of Instrument & Tests

The Model 1140 Micro-Separometer is a electro-mechanical instrument used to perform four discrete tests. ASTM Standard Test Methods D3948 (Jet), D7224 (Jet) and D7261 (Diesel) are used to rate water separation characteristics and D4860 (Jet or Diesel) detects and numerically rates free water and particulate contamination.  This instrument performs each of the four tests above simply by using one of the four “Six Packs” containing the proper coalescer cells.

Water Separation Characteristic

Test Method D3948, D7224 and D7261 employs the use of a turbidimeter, a mechanical mixer, and a disposable coalescer filter based on 5th edition API certified media. A portion of the sample, in a clear glass vial, is used to set the meter to read 100. The sample in the vial is discarded and the vial is retained.

Another portion of the sample in a plastic syringe is used to create a water/fuel emulsion using the mixer. The emulsion is passed through the filter at a programmed rate and a portion is collected in the retained vial. The vial is replaced in the turbidimeter and the water separation characteristic of the fuel is rated.

The value obtained is compared to the unprocessed sample that was used to set the meter to 100. The higher the rating, 100 being the maximum, the less surfactant present.

Free Water and Particulate Contamination (Clear& Bright)

Test Method D 4860 passes a portion of the sample through a filter medium, which is collected in a clear glass, vial. The vial is placed in the turbidimeter and the meter is adjusted to 100. The processed fuel is discarded and a portion of the unprocessed fuel is placed in the vial, which is re-inserted in the turbidimeter. Higher ratings, 100 is maximum, indicate that there is less free water and particulate present.

“Six Pack” Test Expendables Including Coalescer Cells

A box commonly known as a “Six Pack” that contains six test kits is shown. Each Test Kit contains vacuum packed expendables that are used to perform a single test. Each coalescer/filter is labeled to identify the type of fuel and the applicable ASTM method to be used. A container of distilled water is also included in each Six Pack to perform water separation tests.

Alumicel- six pack (ASTM D3948)

Alumicel-to perform ASTM D3948 water separation test of aviation turbine fuel neat.

· Six-pack containing six test kits.

· Each vacuum-packed kit contains the expendables; coalescer, syringe, distilled water, wipes, vial, plug, and pipette tip.

M-Cell - six pack (ASTM D7224)

Consumable-Model 1140 Micro-Separometer

M-Cell-to perform ASTM D7224 water separation test of aviation turbine fuel neat and with additives.

· Six-pack containing six test kits.

· Each vacuum-packed kit contains the expendables; coalescer, syringe, distilled water, wipes, vial, plug, and pipette tip.

Diesel-six pack (ASTM D7261)

Consumable-Model 1140 Micro-Separometer

DBcell-to perform ASTM D7261 water separation test of diesel fuel B1-B20.

· Six-pack containing six test kits.

· Each vacuum-packed kit contains the expendables; coalescer, syringe, distilled water, wipes, vial, plug, and pipette tip.

Bio diesel- six pack (ASTM D7261)

Consumable-Model 1140 Micro-Separometer

D cell-to perform ASTM D7261 water separation test of diesel fuel neat (less than 1% Bio).

· Six-pack containing six test kits.

· Each vacuum-packed kit contains the expendables; coalescer, syringe, distilled water, wipes, vial, plug, and pipette tip.

Clear and bright-six pack (ASTM D4860)

Consumable-Model 1140 Micro-Separometer

Clear and Bright cell-to perform ASTM D4860 water separation test of aviation turbine and distillate fuels.

· Six-pack containing six test kits.

· Each vacuum-packed kit contains the expendables; coalescer, syringe, distilled water, wipes, vial, plug, and pipette tip.

Pipette

· Blue, aluminum, 50 µL.

· Required for precision water injection in the water separation tests.

Foam case-1140

· Custom made canvas and foam, black, 23” x 18” x 10”.

· Designed for the safe carry and containment of the Micro-Separometer instrument.