原理
雷達物位計天線發射較窄的微波脈沖，這個脈沖以光速在空間傳播，遇到被測介質表面，其部分能量被反射回來，被同一天線接收。發射脈沖與接收脈沖的時間間隔與天線到被測介質表面的距離成正比，從而計算出天線到被測介質表面的距離。
特點
由于采用了的微處理器和獨特的EchoDiscovery回波處理技術，雷達物位計可以應用于各種復雜工況。
“虛假回波學習”功能使得儀表在多個虛假回波的工況下，可正確地確認真實回波，獲得準確的測量結果。
多種過程連接方式及天線型式，使得WTCRD5X系列雷達物位計適于各種復雜工況及應用場合。如：高溫、高壓及小介電常數介質的測量等。
采用脈沖工作方式，雷達物位計發射功率極低，可安裝于各種金屬、非金屬容器內，對人體及環境均無傷害。

特  征： 喇叭口天線，波束角較小。
應  用： 液體測量或短量程固體測量。能適應過程條件復雜的環境。
量程： WTCRD53 [30m] / WTCRD54 [70m]
測量精度： WTCRD53為±10mm / WTCRD54為 ±20mm
過程連接： 法蘭316L
天線材料： 不銹鋼316L /PTFE
過程溫度： -40…200°C
過程壓力： -1.0…40bar
頻率范圍： 6GHz
信號輸出： 兩線制/四線制4…20mA/HART
許可證 ： P 標準型（非防爆） I 本安型（Exia IIC T6）（只可選用鋁外殼）
C 本安型+船用許可證（Exia IIC T6）（只可選用不銹鋼外殼）

G 本安型+隔爆型（Exd [ia]ia IIC T6）（選用外殼見下“注”）
天線型式/材料： C 喇叭天線50/不銹鋼316L（導波管安裝） D 喇叭天線80/不銹鋼316L（導波管安裝）*
E 喇叭天線100/不銹鋼316L F 喇叭天線150/不銹鋼316L
G 喇叭天線200/不銹鋼316L
天線延長管： A 無 B   200mm C   500mm D   1000mm E   2000mm X 特殊定制
過程連接：
FA 法蘭 DN50  PN1.6 不銹鋼316L（GB/T9119-2000） FB 法蘭 DN80  PN1.6 不銹鋼316L（GB/T9119-2000）
FC 法蘭 DN100 PN1.6 不銹鋼316L（GB/T9119-2000） FD 法蘭 DN150 PN1.6 不銹鋼316L（GB/T9119-2000）
FE 法蘭 DN200 PN1.6 不銹鋼316L（GB/T9119-2000） YP 特殊制定
密封/過程溫度：
2  Viton/-40～+130℃ 3  Kalrez/-20～+130℃
4  Viton/-40～+200℃帶散熱片（過程溫度大于100℃時選用） 5  Kalrez/-20～+200℃帶散熱片（過程溫度大于100℃時選用）
電子組件：
B   (4～20)mA/HART兩線制 C   (4～20)mA/(22.8～26.4)V DC/HART兩線/四線制 D   (198～242)V AC/HART四線制
外殼/防護等級：A 鋁/IP67B 塑料/IP66D 鋁兩腔/IP67G 不銹鋼316L/IP67
電纜進線： M   M20x1.5 N   ½NPT
現場顯示/編程：
A 帶 X 不帶
吹掃：

A 帶 X 不帶
注: 本安+船用許可證（Exia IIC T6）只限用“A”或“B”電子組件及“G”型外殼；本安+隔爆型（Exd [ia]ia IIC T6）只限用“D”型外殼。

Principle: the radar level gauge antenna transmits a narrow microwave pulse, which propagates in space at the speed of light.

When it encounters the surface of the measured medium, some of its energy is reflected back and received by the same antenna.

The time interval between the transmitting pulse and the receiving pulse is proportional to the distance from the antenna to the

measured dielectric surface, thus the distance from the antenna to the measured dielectric surface is calculated.

Features: because of the advanced microprocessor and unique EchoDiscovery echo processing technology, radar level meter

can be used in all kinds of complex working conditions. The "false echo learning" function enables the instrument to

correctly confirm the true echo and obtain the accurate measurement results under the condition of multiple false echoes.

A variety of process connection modes and antenna types make WTCRD5X series radar level meters suitable for

various complex working conditions and applications. Such as: high temperature, high pressure and small dielectric constant measurement, etc.

The radar level meter can be installed in all kinds of metal and non-metal containers without harm to human body

ａnd environment by means of pulse working mode, the radar level meter emits very low power and can be installed in various

metal and non-metallic containers. Characteristic: trumpet antenna, small beam angle. Should be used: liquid measurement or short-range solid measurement.

Able to adapt to complex process conditions. Maximum measuring range:

WTCRD53 [30m] / WTCRD54 [70m] measuring accuracy: WTCRD53 ±10mm / WTCRD54 ±20mm

process connection: flange 316L antenna material: stainless steel 316L / PTFE process temperature:-40. 200 °C

process pressure:-1.0. 40bar frequency range: 6GHz signal output: two-wire / four-wire 4. 20mA/HART

license: P Standard (non-explosion-proof) I intrinsically safe (Exia IIC T6) (aluminum case only)

C intrinsically safe marine license (Exia IIC T6) (stainless steel case only) G Intrinsically safe (Exd [ia] ia IIC T6)

antenna type / material: C horn antenna 50 / stainless steel 316L (limited waveguide installation) D horn

antenna 80 / stainless steel 316L (waveguide installation only) * E horn antenna 100 / stainless steel 316L F

horn antenna 150 / stainless steel 316L G horn antenna 200 / stainless steel 316L antenna extension

tube: a non-B 200mm C 500mm D 1000mm E 2000mm X Special custom process connection:

FA flange DN50 PN1.6 stainless steel 316L (GB/T9119-2000) FB flange DN80 PN1.6 stainless steel 316L

(GB/T9119-2000) FC flange DN100 PN1.6 stainless steel 316L (GB/T9119) -2000) FD flanges DN150 PN1.6 stainless steel 316L

(GB/T9119-2000) FE flanges DN200 PN1.6 stainless steel 316L (GB/T9119-2000) YP special seal / process

temperature: 2 Viton/-40~ 130 ℃ 3 Kalrez/-20~ 130 ℃ 4 Viton/-40~ 200 ℃ with heatsink (process temperature greater

than 100 ℃; 5 Kalrez/-20~ 200 ℃ with heat sink (process temperature greater than 100 ℃) electronic module: B (4? 20)

MA/HART two-wire C (4 / 20) mA/ (22.8-26.4) V DC/HART two-wire / four-wire D (198 / 242) V AC/HART

four-wire housing / protection class: a aluminum / IP67B plastic / IP66D aluminum two-wire case / protection class:

a aluminum / IP67B plastic / IP66D aluminum Cavity / IP67G stainless Steel 316L/IP67 Cable Inlet: M M20x1.5 N + NPT

onsite display / programming: a with X without sweep, A with X without Note: this safe Shipbuilding license

(Exia IIC T6 only) Use "A" or "B" electronic components and "G" enclosure; Exd [ia] ia IIC T6 is limited to "D" case.