XJ-MC201E馬達保護器是我司適應石油、化工、冶煉、鋼鐵、脫硫脫硝、電廠、污水處理等使用電動機最多的行業客戶智能制造發展的需要，分析研究高壓保護、低壓保護、的技術和設計思想，向廣大用戶提供的集保護、控制、測量、計量、電能質量分析、故障錄波分析、通訊于一體的馬達保護器。

XJ-MC201E motor protector is developed by our Company by analyzing and researching the advanced technologies and design ideas of high-voltage and low-voltage protection, to gear to the needs of customers in petroleum, chemical, smelting, steel, desulfurization and denitrification, power plant, sewage treatment and other industries who use the motors at most for intelligent manufacturing development. It has the functions of protection, control, measurement, metering, power quality analysis, fault record analysis and communication.

XJ-MC201E馬達保護器適用于開關采用接觸器控制的電機回路。

XJ-MC201E motor protector is applicable to the motor circuit with the switch controlled by a contactor.

裝置主要特點

Main features

? 采用32位高性能嵌入式ARM作為CPU，采用實時多任務嵌入式操作系統；

? Use 32-bit high-performance embedded ARM as CPU, with a real-time multitasking embedded operating system;

? 采用高性能軟硬件測量技術,保護測量二者兼得，電壓電流0.5級，功率和電能0.5級，電流具備10倍過載能力。

? Apply high-performance software and hardware measuring techniques for both protection and measurement, with the voltage and current of Level 0.5, the power and electric energy of Level 0.5, and the current for 10 times of overload.

? 高速現場總線傳輸技術，采用標準RS485通訊口、CAN通訊口，支持Modbus-RTU協議，裝置與裝置之間協調通訊，無需管理機轉換數據。CAN接口與CAS301(CAN通訊網關)配合使用，實現數據的高速傳輸。

? Apply high-speed fieldbus transmission technique, with standard RS485 and CAN COM ports, support Modbus-RTU, and achieve coordinated communication between devices, and convert data without a manager. Use CAN interface with CAS301 (CAN communication gateway) for high-speed transmission of data.

? 采用大屏幕漢字液晶顯示，人機界面友好，能顯示多種測量參數、修改保護定值、1000條運行報告、故障錄波等；

? Apply a large LCD for Chinese characters, with friendly MMI to display a variety of measurement parameters, modify the fixed protection values, save 1000 operation reports and record fault, etc.;

? 液晶界面能顯示電機接線模式圖；

? Display the motor wiring simulation diagram on LCD;

? 提供故障錄波功能和SOE事件；

? Provide fault record and SOE;

? 集保護、控制、測量、計量、電能質量分析、通訊于一體的高性能的馬達保護器；

? High performance motor protector integrating protection, control, measurement, metering, power quality analysis and communication;

? 的軟硬件自檢功能。

? Have a perfect self-test function of software and hardware.

注：

Notes:

1、 矢量零序保護為為自產零序電流。

1. Vector zero sequence protection is for the self-generated zero sequence current.

2、 外接零序或漏電保護需外接零序互感器或漏電互感器。兩保護功能的使用需對應在系統設置中“零序/漏電互感器選擇”中選擇“零序”或者“漏電”。

2. The external zero sequence or leakage transformer is required for external zero sequence or leakage protection. To use the two protection functions, customers shall select “Zero Sequence” or “Leakage” in “Zero Sequence/Leakage Transformer Selection” in System Setting.

3、 CAN通訊為選配，此接口也可選為第2路RS485通訊，為選配功能。

3. CAN communication and 2-way RS485 communication are optional.

產品選型說明Instructions of Product Selection

主機單元訂購選型說明

Instructions of ordering and selection of machine units

? 在需要安裝儀表的盤上，開一91mm×91mm的方孔（帶端子排安裝深度95mm）；

? Dill a square hole of 91mm×91mm on the panel to be installed with a meter (with a terminal block, in depth of 95mm);

? 將設備取出后去掉兩邊安裝卡子，然后從前插入到設備孔中；

? Remove the installation clips on both sides after taking out the device, and then insert into the hole from the front;

? 把安裝卡子分別從后部順著設備中間的溝槽裝上，并向前推緊卡子即可。

? Install the clips from the back along with the groove in the middle of device, and then push them to the front.