德國奧萊斯OLES進口低溫用截止閥

【進口低溫用截止閥】詳細說明：

不銹鋼低溫截止閥，特別是超低溫閥門，其工作溫度極低。在設計這類閥門時，除了應遵循一般閥門的設計原則外，還有一些特殊的要求。不銹鋼低溫截止閥的設計要求: 1、閥門在低溫介質及周圍環境溫度下應具有長時間工作的能力。2、閥門不應成為低溫系統的一個顯著熱源。這是因為熱量的流入除降低熱效率外，如流入過多，還會使內部流體急速蒸發，產生異常升壓，造成危險。3、低溫介質不應對手輪操作及填料密封性能產生有害的影響。4、直接與低溫介質接觸的閥門組合件應具有防爆和防火結構。  

Stainless steel Cryogenic Globe valves, especially ultra-cryogenic valves, operate at extremely low temperatures. In the design of such valves, in addition to the general valve design principles, there are also some special requirements. Design requirements of stainless steel Cryogenic Globe valve: 1. Valves should be able to work for a long time in low temperature medium and ambient temperature. 2. Valves should not be a significant source of heat for cryogenic systems. This is because in addition to reducing the thermal efficiency of heat inflow, if the inflow is too much, it will also make the internal fluid evaporate rapidly, resulting in abnormal pressure rise, causing danger. 3. Low temperature medium should not have harmful effect on handwheel operation and packing sealing performance. 4. Valve assemblies in direct contact with cryogenic media shall have explosion-proof and fire-proof structures.

【進口低溫用截止閥】結構說明：

低溫及超低溫截止閥安裝在空分設備、LNG船、低溫液體貯運設備上面，對液氧、液氮、液氬、液化天然氣、液化石油氣等低溫和深冷介質進行控制。低溫及超低溫截止閥采用加長閥桿、加長閥蓋的結構，加長高度可以按照客戶要求加高，高壓低溫截止閥都帶有自動泄壓孔，以保證中腔壓力不會過高而產生危險。低溫截止閥有二種閥蓋設計形式。
*種是螺栓式閥蓋，其閥體與閥蓋用螺栓螺母連接，纏繞式墊片（316夾柔性石墨制造）?？蛻粲刑厥庖髸r也可采用金屬環連接。
第二種是焊接式閥蓋，其閥體與閥蓋用螺紋連接，全焊密封?？蛻粲刑厥庖髸r也可采用透焊連接。  

【進口低溫用截止閥】優點：

1.結構簡單，制造和維修比較方便。
2.工作行程小，啟閉時間短。
3.密封性好，密封面間磨擦力小，壽命較長。