BACnet路由器美國進口，帶診斷的BACnet路由器，質量好，*，壽命長。BACnet/IP to ARCNET

BR2 Router – BACnet Network Router

The BR2-A - BACnet router provides routing between BACnet/IP, and BACnet ARCNETnetworks. This allows integrators to mix and match these two BACnet network datalink technologies within a single BACnet Internetwork. 

The BR2 Router is enclosed in a metal case that can be mounted standalone or in a 1U rack space. The unit has one ARCNET connector and one Ethernet 10/100 RJ45 connector.

The ARCNET connector is an industry standard BNC connectore for 93 Ohm (RG62) cable. It operates at the standard 2.5 Mbps and by default uses normal timeouts though it can be set for one of the three available ARCNET extended timeouts settings used in long cable run segments. Logically and physically 254 devices can be addressed. The ARCNET is not terminated internally to give the user flexibility in connections and topologies used.

The Ethernet port uses a standard shielded RJ45 connector with integral LEDs. Connection status can quickly be ascertained from the Link and Activity LEDs on each interface.

An embedded web server allows for commissioning and configuration and troubleshooting via a standard web browser. A power LED is present along with the LEDs for interface status on each interface.

Flexible routing between:

• BACnet/IP and ARCNET
• BACnet Ethernet and ARCNET

IP network support:

• Web server for commissioning and troubleshooting
• Status page for diagnostics
• Secure login to web configuration and status interfaces
• BACnet/IP Broadcast Management Device capability (BBMD) 
• Foreign Device Support (FD)
• BACnet Device Object support

Standard Communications:

• 10/100 Mbps Ethernet.
• Industry standard ARCNET with surge protection
• Flexible external ARCNET termination
• Convenient Installation

• 12 VDC at under 50W
• Available 1U server rack mount shelf
• Available DIN rail mounting bracket.

Overall Specifications:

• Power: 12VDC at under 50W
• Operating temperatures: 0 to 40ºC
• Storage temperature: -20 to 80ºC
• Relative Humidity: 10-95% non condensing

Ethernet:

• IEEE 802.3 10/100 MBPS
• 10BaseT, 100BASETX phsyical. RJ45 connectors
• Half/Full duplex
• 100m (max) CAT5 cable length.
• LEDs: link and activity as labelled.

ARCNET:

• ANSI/ASHARE 135 (ISO 16484-5)
• 2.5 MBPS data rate
• RG-62 93Ohm coaxial bus physical layer
• 1200m (abs max) cable length
  (Rule of thumb: nodes x km length x termination and dielectric flaws should not exceed three)
• LEDs: link and activity as labelled.

Regulatory Compliance: FCC and CE marked

Options:

• Rack mounting kit.
• External network surge protector.