• ABB斷路器航空插頭1VCF339750S1074，Socket extension with wiring L=3mt, 58 female pins (C.E. socket) without tube for VD4 36-40,5kV Classic; VD4-AF

• VD4斷路器插座1VCF599750S0163,  Plugs, sockets and tube  提示：原裝產品 帶有外包裝 和 說明書。

• 航空插防誤插針矩陣附件 可防止錯誤額定電流的斷路器被搖進到開關柜中。
  Plug with 58 male pins, C.E. type without wiring, for HD4, VD4, Vmax, VM1, VSC,Vcontact front version. NOTE: Special crimping, extractor tools are needed and arenot included.航空插頭插座 單獨航空插座座體 不含插座等。斷路器插針原配插針 鍍銀材質 ，航空插座用插針（Φ1.0 mm Φ1.5 mm Φ2.0 mm Φ2.5 mm ）× 50只，

• 1VCF339750S1073  Socket extension， 1VCF339750S1074

• 

• ABB原配  航空插頭1YHB00000000806 ，插針 帶導線,1YHB00000000163，VD4斷路器 CALOR EMAG TYPE Y1 UI 250v ith2 10A, ABB插座用的插針(2.5)(1 包) *1mm*插針50pcs 公插針* 航空插連接件 *航空插頭(VD4 部分）  母插針50pcs（1.5）*VD4 航空插頭組件（不帶插線）*航空插頭組件*航空插座套件-柜體*VD4 二次出線上部線套（航空插頭圓接頭）*VD4 二次出線下部線套（航空插頭圓接頭） *航空插座蓋板 *螺旋管28*36 *航空插座(柜體部分）*VD4 航空插頭用的插針(2.5)（1 包）*VD4 航空插 *PT 插座 加熱器 地刀位置指示器加熱器 微動開關   消諧電阻 連接片 玻璃膠
  

1VCF309850S4913  CALOR EMAG  TYPE Y1 Ui250V Ith2  10A。
1VCF349899S0031 Socket with 58 female pins (AMPH socket) without wiring, for HD4, VD4 side version
1VCF379652S0101 Plug and socket with 58 female and male pins (AMPH plug and socket) without wiring, for HD4, VD4 side version
1VCF349799S0560 Plug with 58 male pins, C.E. type without wiring, for HD4, VD4, Vmax, VM1, VSC, Vcontact front version.NOTE: Special crimping, 1VCF309850S2913  extractor tools are needed and are not included.
1VCF349750S0483 Position switch Q60-FB1-FCM1 (NO) for circuit breaker's motor protection
1VCF349850S2913  for HD4, HD4/R (from SN: AC00002779)
1VCF599750S0163 Socket with 58 female pins, C.E. type without wiring, for Unigear, UniSec WBS-WBC, Univer C, Unisafe, PowerCube, CBE.NOTE:     Special crimping, extractor tools areneeded and are not included.
1VCF349799S0171 Motor limit switch S33M/1-BS1-BGS1 for HD4-VD4/R ESH
1VCF349750S0121 Manual device for closing spring charging for HD4-VD4/R ESH
1VCF339799S0426 Insulating tube, length 3mt., for plug connector of MV circuit breaker
1VCF349750S0407 Mechanical interlock with the door for HD4/W/P/US/Sec, VContact/W/P, VD4/P/W/PW/US/Sec, VM1/P/Z/W/AP/PW,     1VCF339799S0300  Vmax/L/W/Sec/P/PG/PN/PNG, VSC/P/PG/PN/PNG/S-PG/S-PNG
1VCF309550S0302 Position switch S75I-S75S-BT1-BT2-BGT1-BGT2 standard version, in the truck for VSC-SRC, VSC/P/PG/S-PG
1VCF309599S0051 Capacitor for VSC

1VCF349700S0244 Plug interlock pin, set of 3, for HD4, V/Contact, VD4, VM1, Vmax

1VCF309599S0031 Position switches of contactor set of 10 for VSC
1VCF309599S0082 Tulip-type contacts, D.35-16 fingers, set of 6 pieces for fuses BS type,for VSC/P 7-12kV
1VCF309599S0081 Tulip-type contacts, D.35-16 fingers, set of 6 pieces for fuses DIN type, for VSC/P 7-12kV
1VCF309503S0070 Manual truck of circuit breaker for VSC 7-12/P 400A without position switches and Electromechanical truck lock coil
1VCF309750S0201 Position switches BGB1-BGB2 of circuit-breaker operating mechanism (set of 14)for HD4 12-17kV 630-1250A 25kA series 5 1VCF599750S0163 except Marine and Gostversions.
1VCF309750S0221 Position switches BGB1-BGB2 of circuit-breaker operating mechanism (set of 20)for HD4 12-17kV 630-1250A 25-31,5kA series 5 from 1VCF309850S4913  2016 except Marine and Gost versions.
1VCF349750S0334 Position switches of circuit-breaker operating mechanism (set of 10)for HD4 frontal version
1VCF349750S0335 Position switches of circuit-breaker operating mechanism (set of 15)with fig.9 for HD4 frontal version except Calor Emag version
1VCF349850S0159 Position switches of circuit-breaker operating mechanism (set of 15) without fig.9for HD4 frontal versions from s.n.AC00002779, 1VCF339799S0426 VD4/R/S/Uniair/Unimix with ESH.
1VCF349750S0395 Position switch S75C-BT3-BGT3 for HD4/W/P/SEC/GT_P/US, HM1/UT_W/UT_P froms.n. AC00002779, VD4/P-G/GT-P 12kV, VSC7-12/P/PG, Vmax/W/SEC, VD4/P/C/W/ PW/US/SEC/Z
1VCF349850S0161 Position switches of circuit-breaker operating mechanism (set of 5)for HD4/R-SEC only.
1VCF349850S0162 Position switches of circuit-breaker operating mechanism (set of 10)
1VCF349750S0201 Lever for manual closing spring charging for HD4 fixed version
1VCF349750S0211 Lever for manual closing spring charging and lever for racking in/out the circuitbreaker for HD4/NFSG
1VCF349750S0212 Lever for manual closing spring charging and lever for racking in/out the circuitbreaker for HD4/C/W/P/Z/GT_P/US
1VCF349750S0213 Lever for manual closing spring charging for HD4 side version
1VCF349750S0214 Lever for manual closing spring charging and lever for racking in/out the circuitbreaker for HD4/Z 40.5kV
1VCF349799S0501 Mechanical operation counter for HD4-VD4R ESH
1VCF349750S0371 Transient contact Q0-BB4-BGB4 for HD4 up to s.n. AC00002778
1VCF349750S0372 Transient contact Q0-BB4-BGB4 for HD4 from s.n. AC00002779
1VCF349750S1460 Position switch S75I-S75S-BT1-BT2-BGT1-BGT2 for circuit breaker with manual truck for HD4/W/E-W/P 12-17kV,
1VCF329750S0913
1VCF339799S0407 Support coils with diode bridge
1VCF339799S0402 Transient contact BB4-S7-BGB4  
1VCF339799S0491 Lever for manual closing spring charging  
1VCF339799S0131 Lever for racking in/out the circuit breaker
1VCF339799S0403 Position switches S1-BGS1 or S4-BGB2 goldened
1VCF339799S0400Green close pushbutton “Push ON" and Red open pushbutton “Push OFF"
1VCF339799S0401Red close pushbutton “Push ON" and Green open pushbutton “Push OFF"
1VCF339757S2902 Electromechanical locking release for truck   with rectifier, aux. voltage24Vdc for VD4G Classic
1VCF339757S2903 Electromechanical locking release for truck  with rectifier, aux. voltage30Vdc for VD4G Classic
1VCF339757S2904 Electromechanical locking release for truck  with rectifier, aux. voltag48Vdc for VD4G Classic
1VCF339757S2905 Electromechanical locking release for truck  with rectifier, aux. voltage60Vdc for VD4G Classic
1VCF339757S2909 Electromechanical locking release for truck with rectifier, aux. voltage100Vac, 110Vdc/ac for VD4G Classic
1VCF339757S2912 Electromechanical locking release for truck  with rectifier, aux. voltage125Vdc/ac for VD4G Classic
1VCF339757S2918 Electromechanical locking release for truck  with rectifier, aux. voltage220Vdc/ac for VD4G Classic
1VCF339757S2921 Electromechanical locking release for truck  with rectifier, aux. voltage 230Vac, 240Vdc/ac for VD4G Classic

VD4斷路器航空插頭1VCF339750S1074，Plug with 58 male pins, C.E. type without wiring, for HD4, VD4, Vmax, VM1, VSC,Vcontact front version. NOTE: Special crimping, extractor tools are needed and arenot included.

1VCF339799S0491  Lever for manual closing spring charging for VD4 36-40,5kV Classic

1VCF339799S0131  Lever for racking in/out the circuit breaker for VD4 36-40,5kV Classic

1VCF559700S0401 Triple bit key for Powerbloc 36/40,5kV from s.n. BE00040351, VD4 36-40,5kV Classic from s.n. BE00043971

1VCF339751S0474  Mechanical draw-out device for VD4/P/Z 36-40,5kV Classic

1VCF499100S0030  Test cable with plug & socket (58 pins)

1VCF499100S0039  Test cable with wiring, plug & socket 58 pins, SG type L 2mt for UniverG

1VCFTMCSMDC2V110DC  Digital motor driven trolley MDC2 auxiliary supply 110Vdc for Truckmaster CS (cassette)

1VCFTMCSMDC2V220DC  Digital motor driven trolley MDC2 auxiliary supply 220Vdc for  Truckmaster CS (cassette

1VCF309400S0171 Set of special tools for remove the fuses DIN-BS type, rack in-out for V/contact

1VCF309450S0111  Plug with wiring for electrical latching 24-60V for V/Z/C/W/P

1VCF309450S0112  Plug with wiring for mechanical latching 24-60V for V/Z/C/W/P

1VCF309450S0113  Plug with wiring for electrical latching 100-250V for V/Z/C/W/P

1VCF309450S0114  Plug with wiring for mechanical latching 100-250V for V/Z/C/W/P

1VCF309450S0121 Plug with wiring for electrical latching 24-60V with cable for position switch in the truck for V/Z/C/W/P

1VCF309450S0122 Plug with wiring for mechanical latching 24-60V with cable for position switch in the truck for V/Z/C/W/P

1VCF309450S0123 Plug with wiring for electrical latching 100-250V with cable for position switch in the truck for V/Z/C/W/P

1VCF309450S0124 Plug with wiring for mechanical latching 100-250V with cable for position switch in the truck for V/Z/C/W/P

1VCF309450S0131 Plug with wiring for electrical latching 24-60V with cable for position switch C.E. version in the truck for V/Z/C/W/P

1VCF309450S0132 Plug with wiring for mechanical latching 24-60V with cable for position switch C.E. version in the truck for V/Z/C/W/P

1VCF309450S0133 Plug with wiring for electrical latching 100-250V with cable for position switch C.E. version in the truck for V/Z/C/W/P

1VCF309450S0134 Plug with wiring for mechanical latching 100-250V with cable for position  switch C.E. version in the truck for V/Z/C/W/P

1VCF309400S0101 Plug with wiring length 3mt for electrical latching for V/F

1VCF309400S0102 Plug with wiring length 3mt for mechanical latching for V/F

1VCF309400S0103 Plug with wiring length 6mt for electrical latching for V/F

1VCF309400S0104 Plug with wiring length 6mt for mechanical latching for V/F

VD4斷路器插頭帶導線 1VCF339750S1074 Plug with 58 male pins, C.E. type without wiring, for HD4, VD4, Vmax, VM1, VSC,Vcontact front version. NOTE: Special crimping, extractor tools are needed and arenot included.