FT-104A氧化鋁/氟化鋁安息角測定儀 

FT-104Aaluminum oxide/fluorinated aluminium angle of repose meter

一．參照標準standard：

GB/T6609.24-2004《氧化鋁化學分析方法和物理性能測定方法：安息角的測定》。

It was designed and manufactured accordingto the national standard GB/T6609.24-2004 "the method of chemical analysisof alumina oxide and the method of physical performance measurement: "determinationof repose angle ".

YS/T581.13氧化鋁化學分析方法和物理性能測定方法 安息角的測定》。

Conforms to YS/T581.13 . technicalspecification “aluminium oxidechemical analysis method and the measurement method of physical performanceangle of repose measurement”.

二.參數(shù)資料

不銹鋼漏斗：上內徑74mm、下料口內徑6mm兩檔板間裝有孔徑為1mm的篩網(wǎng)。此漏斗被緊固在支架上。

SS funnel: upper inner diameter 74mm, feedopening inner diameter 6mm,

between the two baffle plates with 1mmsieve. The funnel is fastened on the bracket.

電鍍鋼底板：底板由鋼制成材料制成，尺寸為：寬200mm、長270mm、厚18mm。在拋光電鍍的底板上表面上刻有四條互成45?角的直線。正好在漏斗處的中心部分有1個固定高度量規(guī)的定位銷，底板下面有可調水平的支腳。

Electroplated steel bottom plate: Thebottom plate is made of steel, minimum size: width 200mm, length 270mm, thick18mm. On the surface of polished electroplated steel bottom plate carved fourstraight lines with 45 degree angles each other. There are 1 position pin for fixedheight gauge in the center part of the funnel, the bottom plate is providedwith adjustable feet.

漏斗固定器:由不銹鋼組成，其結構應緊固。漏斗中心線垂直于中心定位銷。

Funnel holder: made of stainless steel, thestructure should be fastened.

Funnel center line perpendicular to centerposition pin.

高度量規(guī)（決定高度的金屬圓柱體）：它是表面拋光的由不銹鋼制成的圓柱體，高40mm，底部有一凹槽，以便同底板的定位銷中心相銜接。

Height gauge(Metal cylinder for determinethe height): it is a polished stainless steel cylinder, height 40mm, a grooveat the bottom, so as to connect with the positioning pin center of the bottomplate.

重量Weight：約16kg

FT-104A 氧化鋁/氟化鋁安息角測定儀 視頻文件鏈接：

/v_show/id_XMTMyMTM2NzM5Ng==.html?spm=a2hzp.8253869.0.0