成人精品丝袜在线一区,团鬼六之黑蝎秘书

本公司成立與2005年,主要銷售儀器儀表

產品簡介：韓國振動耐磨擦試驗機專用磨料韓國三星振動耐磨測試磨料，韓國三星專用磨料

韓國JIN POONG B.R.TECH三星磨料產品詳情

產品簡介：韓國振動耐磨擦試驗機專用磨料韓國三星振動耐磨測試磨料，韓國三星專用磨料。重量：14.5KG/袋型號：黃色型號:PV-10綠色型號:PCL-15 作用：三星產品噴涂電鍍等測試，如：按鍵、塑膠外殼、涂料表面耐磨擦測試。

產品介紹：

韓國振動耐磨擦試驗機專用磨料

韓國三星振動耐磨測試磨料，韓國三星專用磨料。

重量：14.5KG/袋

型號：黃色型號:PV-10綠色型號:PCL-15

作用：三星產品噴涂電鍍等測試，如：按鍵、塑膠外殼、涂料表面耐磨擦測試。

振動耐磨測試磨料

詳細介紹：

First of all, thank you for buying one of our machines.

We are producing Vibratory Finishing Machines, Vibration applied machines, Precision processing special machines with our accumulated technology and thorough quality systems under our motto that we serve our customers with the best quality products

We would like to introduce, through this manual, how to properly use the machine, to perform its best function in operation that our development and production team have made with their endeavors.

This manual will guide the users to understａnd the equipment, how to use in the best conditions, how to increase productivity, how to maintain the equipment in the very simple way.

For anything that is not sufficiently described, please feel free to contact our office, then we will supply with further information that we can do.

We hope this equipment will do a good role in your business, Good luck!

From all the members of Jin Poong B.R. Tech.

WARRANTY

1.Warraty period of this equipment is 1 year or 2000 hours whichever comes first. and warranty period of the electrical parts is 6 months.

韓國三星磨料韓國三星磨料韓國三星磨料韓國三星磨料韓國三星磨料

This is based on the normal operation, operator’s mistake or mishandling of the equipment, excessive operation beyond its capability and failure to maintain on time will release the warranty obligation.

2. In any case that the user has changed the machine parts or corrected without any prior agreement, this warranty will be invalid..

PAINTING DURABILITY TESTER MACHINE

MODEL : TC - 15 (SM - 1502)

I. COMPOSITION OF THE EQUIPMENT

1. VIBRATORY TUMBLER

2. SOUND COVER

3. AUTO WATER & COMPOUND SUPPLY SYSTEM

4. CONTROL UNIT

II. SPECIFICATION OF THE EQUIPMENT

1. VIBRATORY TUMBLER

Tub interior dimension: W180mm x L530mm

In-put area dimension: W130mm x L530mm

LINING : Hot pour Polyurethane Casting, Thickness: 15mm

Motor : 220V x 1Hp x 3ph x 60Hz. (2 pole)

Motor R.P.M : 3500

2. SOUND COVER

L920mm x W620mm x H900mm+120mm

Top door with Gas Cylinder

3. AUTO WATER & COMPOUND SUPPLY SYSTEM

Water tank, metered to be 500ml

Water tank, metered to be 1000ml + addition of Compound 200ml

Water tank, metered to be 500ml + addition of Compound 20ml

Compound metering pump 300ml/min, adjusted to supply 200 ml by a timer.

Compound metering pump 20ml/min, adjusted to supply 20 ml by a timer.

III. UTILITY REQUIREMENT

1 Electrical Power: 220V x 1Ph (20A).

2 Tap water: 4L/Hr. (To be linked to the right side of the control unit by 8mm hose.)

IV. INSTALLATION

Just place on the flat concrete floor without any anchoring.

In case the equipment is not horizontally leveled, the mass in the tumbler can move to a side,

please be careful.

Please link 3 wires from the motor to the U.V.W. terminal in the control box.

Please link 2 wires from the main source of electrical power to the R.T. terminal in the box.

Please link tap water to the supply valve on the right side of the control box by 8mm hose.

In case Tap water contains some foreign substance, please install pre-filter before this hose.

Please link a hose(20mm) from the hose nipple on left side of the control box to the main machine.

A little longer hose is shipped with machine, please cut it off and adjust depending on

the site allocation

. Please link the discharge valve on the rear side of machine to the laboratory discharge pipe line.

Please leave the discharge valve always open except for the maintenance.

A compound container needs to be placed in the room under the control box.

Please remove the top lid and place the container in the room and put a separate lid pre-drilled

on 3 places, 1 big hole in the center and 2 small holes on the right and left.

On the center hole, please place a level sensor which emit alarm when there is not enough

compound in the container,

and on the right and left holes insert 2 hoses that come from the metering pumps.

V. OPERATION

Supply the control box with power (put the Breaker switch ON, put the disconnect switch ON) and

put the selector switch ON, then you will have light on the Power lamp.

Fill the vibratory tumbler with media 15L (11.25L of Cone and 3.75L of Pyramid).

Put the Mode to Manu and push on Start.

If the mass turns from front to back, the motor direction is correct.

In case it turns in the opposite direction please correct by changing the wire.

1. PREPARATION COURSE

The media contains some flashes and burrs. This course is, prior to the main course of testing,

to condition the media by tumbling to the right purpose of the testing.

First of all, put MODE to Manu and push on PRE WATER-1, then 500ml tank will be filled with water.

Pls push on only once, if you push on twice it will be stopped.

O Once it is full, it will be automatically disconnected. When the water is evacuated, the tank

is automatically refilled, therefore from next time, there is no need to put to Manu and fill again.

Set the timer 4 hours or 10 hours as required by your company (currently designated to be 10 hours).

Put Mode to PRE and push on Start then the tumbler will start to run and 2000 ml of water

will be supplied automatically.(4 times of 500ml)

At the time of start, 2000ml will be supplied and 500ml will be supplied every 30 min. automatically.

The tank always keeps water 500ml. and supplies when it is required.

2. MAIN COURSE OF TESTING

This course is to test whether the testing parts are safe or damaged when the media and parts

have rubbed each other in the vibratory tumbler.

First of all, put MODE to Manu and push on MAIN Water-1, then water will be ready with 1000ml

in the tank 1, push on MAIN Water-2 then water will be ready with 500ml in the tank 2.

Push on Comp-1, then 200ml of compound will be added to 1000ml of water in the tank-1.

Push on Comp-2, then 20ml of compound will be added to 500ml of water in the tank-2.

Pls push on only once, if you push on twice it will be stopped.

Once you have filled for the first time, when the liquid is evacuated, it is made again automatically

therefore there is no need to do manually again.

Set the timer 1 hour or 2 hours as required by your company.

Put the MODE to Manu and start the machine, then 1000mml of water and 200ml of compound

will be automatically supplied in the beginning and 500ml of water and 20ml of compound

will be supplied every 30 min.

(Note) When there is not enough compound, you will have Alarm light on the control panel,

please fill the container with compound.

VI. MAINTENANCE

In case the inverter inside the control box repeats to trip, one of the 3 wires from the motor

might have been disconnected by the vibration. Please take out the vibratory tumbler from the

sound proof box and disassemble the drain pipe lines and lift up the tub and check the wires

from the motor. If any of the wires were disconnected, please correct it.

In case there is any loud noise from the vibratory tumbler, the bearings on the motor must have

broken, please replace them referring to the assembly drawing of the motor.

In case the liquid of water and compound is not supplied well, some foreign substance might have

been stuck in the ball, please clean the valve referring to the separate manual.

In case compound is not well injected from the metering pump, please clean the balls on the

suction and discharge port of the diaphragm pump.

(Referring to the separate manual, pls clean part No. 2,3,4.)

This may happen after long holidays.

Please clean the filter that is installed right after the in-put water valve on the right side of

the control box.

VII. WARRANTY & FREE REPLACEMENT

We warrant quality for either 380 days from the date of shipment or 2000 hours of operation,

whichever comes first. In case any part does not work properly, we send replacement part only

熱門產品

產品名稱	參考價	地區	公司名稱	更新時間
聲波過球指示器	￥400000	北京市	北京杜克泰克科技有限公司	2026-09-30	在線詢價
BRDF/BTDF測試儀	面議	上海市	上海倍藍光電科技有限公司	2026-09-30	在線詢價
電腦振動噪聲測量儀庫號：M195225	￥8980	北京市	北京海富達科技有限公司	2026-09-30	在線詢價
不銹鋼懸浮床	面議	北京市	北京亞歐德鵬科技有限公司	2026-09-30	在線詢價
UZY600 系列音叉物位控制器	面議		北京瑞普三元儀表有限公司	2026-09-28	在線詢價
雨量氣象監測系統	面議	濰坊市	山東雷穹電子科技有限公司	2026-09-23	在線詢價

免責申明

所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，儀表網對此不承擔任何責任。儀表網不涉及用戶間因交易而產生的法律關系及法律糾紛，糾紛由您自行協商解決

友情提醒：本網站僅作為用戶尋找交易對象，就貨物和服務的交易進行協商，以及獲取各類與貿易相關的服務信息的平臺。為避免產生購買風險，建議您在購買相關產品前務必確認供應商資質及產品質量。過低的價格、夸張的描述、私人銀行賬戶等都有可能是虛假信息，請采購商謹慎對待，謹防欺詐，對于任何付款行為請您慎重抉擇！如您遇到欺詐等不誠信行為，請您立即與儀表網聯系，如查證屬實，儀表網會對該企業商鋪做注銷處理，但儀表網不對您因此造成的損失承擔責任！