適用范圍 Applicable scope

       GMC(LS)系列交流接觸器是九十年代產品。本系列產品為交流50Hz或6Hz，額定絕緣壓為690-1000V，在AC-3使用類別下額定工作電壓為380V時的額定工作電流為9A-400A主要遠距離接通及分?jǐn)嚯娖髦?，適用于控制流電動機的起動、停止及反轉。

        本產品符合IEC947.VDE0660，GB14048等標準。

       GMC(LS) series AC contactors are latest products in 1990's. The series of products for fre-quency of 50/60Hz, rated insulation voltage up to 690-1000V,rated operational current up to 9A-400A at rated operational voltage up to 380V under AC-3. GMC Series AC Contactors are mainly used for making breakin electric circuits at a long istance and for frequent starting  stopping and reve-rsing control of AC motors.

       Products comply with IEC947. VDE0660, GB14048.

型號及其含義 Model and its meaning

主要技術參數 The main technical parameters

正常工作條件和安裝條件 Normal working conditions and installation conditions

◇周?chē)諝鉁囟葹椋?5℃~+40℃，24小時內其平均值不超過+35℃。

◇海拔：不超過2000m。

◇大氣條件：在+40℃時大氣相對濕度不超過50%，在較低溫度下可以有較高的相對濕度，最濕月的平均溫度不超過+25℃，該月的平均相對

濕度不超過90%。并考慮因溫度變化發生在產品上的凝露。

◇污染等級：3級。

◇安裝類別：III類。

◇安裝條件：安裝面與垂直面傾斜度大于±50°。

◇沖擊振動：產品應安裝和使用在無顯著搖動，沖擊和振動的地方。

◇ The ambient air temperature is: -5℃ ~ +40℃, 24hours its average does not exceed +35℃.

◇ Elevation: no more than 2000 meters.

◇ Atmospheric conditions: At +40℃ when the relative humidity of not more than 50%, at a lower temperature can have a higher relative humidity, the

 wettest month average minimum temperature does not exceed +25℃, the average monthly maximum relative Humidity does not exceed 90%. And 

 consider the occurrence of temperature due to condensation on the product.

◇ Pollution Level: 3 level.

◇ Installation category: III category.

◇ Installation Conditions: the installation surface and the vertical slope of more than±50°.

◇ Shock Vibration: The product should be installed and used where there is no significant shaking, shock and vibration.

外形及安裝尺寸 Shape and installation dimensions

訂貨須知 Ordering instructions

訂貨時必須指出：

○接觸器完整的型號名稱。

○線圈的額定工作電壓和頻率。

○訂貨臺數。

○如需訂購標準卡軌，應另行注明。

訂貨示例：GMC(LS)-09線圈電壓220V、50Hz、10臺。

When ordering, you must point out:

○ Contactor complete model name.

○ Rated operating voltage and frequency of coil.

○ Order number.

○ If you need to order the standard rail, please specify separately.

Order example: GMC(LS)-09 coil voltage 220V, 50Hz, 10 units.