適用范圍 Applicable scope

       CJX2系列直流操作交流接觸器，適用于50Hz或60Hz，額定電壓-660V，在AC-3使用類別380V時額定電流9-95A的電路中，供遠距離控制電路或其它電路的通斷，可頻繁起動電動機。接觸器可以積木式加裝，輔助觸頭組空氣延時頭，熱繼電器(40A以上為分立安裝)等附件。該接觸器具有動作平穩，吸合電流小，運行時無噪音的特點。

            CJX2 Series DC Operated AC contactor is suila ble for use in the circuit up to rated voltage up to 660V AC 50Hz or 60Hz and in rated current 9-95A in AC-3/380V load circuits.For remote controlling,  circuit making, breaking and frequent starting AC motors.lt can be also combined with the auxiliary contact group,air delayer, thermal relay devices etc.lt has featu res of equable & reliable action,quick while working.

型號及其含義 Model and its meaning

主要技術參數 The main technical parameters

正常工作條件和安裝條件 Normal working conditions and installation conditions

◇周?chē)諝鉁囟葹椋?5℃~+40℃，24小時內其平均值不超過+35℃。

◇海拔：不超過2000m。

◇大氣條件：在+40℃時大氣相對濕度不超過50%，在較低溫度下可以有較高的相對濕度，最濕月的平均溫度不超過+25℃，該月的平均相對濕度不超過90%。并考慮因溫度變化發生在產品上的凝露。

◇污染等級：3級。

◇安裝類別：III類。

◇安裝條件：安裝面與垂直面傾斜度大于±50°。

◇沖擊振動：產品應安裝和使用在無顯著搖動，沖擊和振動的地方。

◇ The ambient air temperature is: -5℃ ~ +40℃, 24hours its average does not exceed +35℃.

◇ Elevation: no more than 2000 meters.

◇ Atmospheric conditions: At +40℃ when the relative humidity of not more than 50%, at a lower temperature can have a higher relative humidity, the wettest month average minimum temperature does not exceed +25℃, the average monthly maximum relative Humidity does not exceed 90%. And consider the occurrence of temperature due to condensation on the product.

◇ Pollution Level: 3 level.

◇ Installation category: III category.

◇ Installation Conditions: the installation surface and the vertical slope of more than ± 50°.

◇ Shock Vibration: The product should be installed and used where there is no significant shaking, shock and vibration.

外形及安裝尺寸 Shape and installation dimensions

訂貨須知 Ordering instructions

訂貨時必須指出：

○接觸器完整的型號名稱。

○線圈的額定工作電壓和頻率。

○訂貨臺數。

○如需訂購標準卡軌，應另行注明。

訂貨示例：CJX2-09線圈電壓220V、50Hz、10臺。

When ordering, you must point out:

○ Contactor complete model name.

○ Rated operating voltage and frequency of coil.

○ Order number.

○ If you need to order the standard rail, please specify separately.

Order example: CJX2-09 coil voltage 220V, 50Hz, 10 units.