Package included

包括

One Mechanical Pressurre Gauge , two flanges, two steel sealing rings, four high temp. silicone O-rings ( 300℃ Max.), and six screws.

一個機械式壓力計，兩個法蘭，兩個鋼制密封環(huán)，四個高溫。硅酮O形環(huán)（300℃）和六個螺釘。

Structure

結構

Features

特征

Seal tube by tightening screws on the flange without any welding and glue.

在沒有任何焊接和粘膠的情況下，擰緊法蘭上的密封管。

Made of Stainless Steel ( SS304)  with double high temperature silicon O-rings on each flange.

由不銹鋼（SS304）制成，每個法蘭上有兩個高溫硅膠O型圈。

Vaccum level: 10E-5 torr by molecular pump?ａnd 10E-2 torr?by mechanical pump.· 真空度：分子泵為10E-5乇，機械泵為10E-2托。

Demension

尺寸

Warning

注意事項

Must put a refractory tube block in front of the flange (see picture below) to avoid heat radiation melt silicone O-ring. You may order a ceramic block in related products.

必須在法蘭前放置耐火管塊，避免熱輻射熔化硅膠O型圈老化。

Please do not over tighten the three hex screws on the flanges to avoid overpressure incidents. The recommended torque is 35~40 inch-lbs.

請不要擰緊法蘭上的三個六角螺絲，以免發(fā)生超壓事故。推薦扭矩為35～40英寸。

For safety reasons, it is strictly forbidden to enter any flammable or corrosive gas into our flange. If you have any questions, please contact us為了安全考慮，嚴禁通入任何有毒、易燃或腐蝕性氣體進入我們的法蘭。如果有疑問請與我們聯(lián)系。