Features
主要特點

Seal tube by tightening screws on the flange without any welding or gluing.

通過在法蘭上擰緊螺釘而不進行任何焊接或膠合的密封管。

Excellent for any type of tubing: ceramic, glass, quartz and steel pipe.

適用于任何類型的管材：陶瓷、玻璃、石英和鋼管。

Installation requires drilling holes on the furnace casing to mount the flange support.

安裝需要在爐體上鉆孔以安裝法蘭支架。

Made of Stainless Steel (SS304)  with high-temperature silicon O-rings on each flange.

由不銹鋼（SS304）制成，每個法蘭上都有高溫硅膠O型圈。

Delicate metal support allows for both vertical and horizontal adjustment.

精致的金屬支持允許垂直和水平調(diào)整。

Openable flange is designed for sample easily loading / unloading.

可開式法蘭是為了便于樣品的裝卸而設計的。   

Descriptions

描述

Left end comes with a hinged flange with a barbed valve, 1/4" feedthrough and pressure gauge.

左端帶有一個帶倒鉤閥的鉸鏈法蘭，1/4個“穿通和壓力表”。

Mechanical Pressure Gauge is available as an alterlative of regular gauge.

機械壓力表可作為常規(guī)量規(guī)的一種替代形式。

Right end comes with a hinged flange with a barbed valve and KF25 vacuum port.

右端帶有帶倒鉤閥的鉸鏈法蘭和KF25真空端口。

KFD25 angle valve?may require for connecting the vacuum port to a vacuum pump. 

KFD25角閥可能要求將真空口連接到真空泵上。

Vacuum level真空度

10E-5 torr by molecular pump?ａnd 10E-2 torr by mechanical pump

10- E-5乇的分子泵和10E-2的機械泵

Application Note

Place the o-ring on the notch of the hinged flange.

將O型圈放置在折頁法蘭的缺口上。

A tube block is required behind each flange to avoid the silicone O-rings melting.  

每個凸緣后面需要一個管座，以避免硅膠O型圈熔化。

Please do not over tighten the three hex screws on the flanges to avoid overpressure incidents. The recommended torque is 35~40 inch-lbs.

請不要擰緊法蘭上的三個六角螺絲，以免發(fā)生超壓事故。推薦扭矩為35～40英寸。

For safety reasons, BEQ prohibits the use of any toxic, flammable or corrosive gas into our flange.

為了安全考慮，BEQ禁止使用任何有毒、易燃或腐蝕性氣體通入我們的法蘭。